1960 bmw isetta engine

1960 BMW Isetta Engine: Restoration and Performance Tips

By Robert Anderson
AD

The BMW Isetta, a microcar produced in the late 1950s and early 1960s, is an iconic penny-farthing of automobile history. Its unique design, with a single front wheel and an egg-like shape, has left an indelible mark on the automotive world. At the heart of this quirky little vehicle lies a fascinating engine, the focus of our attention today. Let's delve into the intricacies of the 1960 BMW Isetta engine.

The 1960 BMW Isetta was powered by a two-stroke, single-cylinder motorcycle engine, originally designed by Italian engineer Ermenegildo Preti. BMW acquired the rights to this engine and used it in their Isetta models. This engine, with a displacement of 247cc, was mounted at the rear of the vehicle and drove the rear wheel directly. It was a simple, lightweight, and cost-effective power unit that perfectly suited the lightweight Isetta.

The Unique Two-Stroke Engine

The 1960 BMW Isetta's engine was a two-stroke, meaning it completed a full cycle of intake, compression, combustion, and exhaust in just two strokes of the piston. This contrasts with four-stroke engines, which require four strokes to complete the same cycle. The two-stroke design made it compact, lightweight, and inexpensive to produce.

AD
BMW Engine Isetta
BMW Engine Isetta
BZ
BZ
Hemmings Find: 1957 BMW Isetta 2 for Sale
Hemmings Find: 1957 BMW Isetta 2 for Sale

However, two-stroke engines also have their downsides, which are mostly related to fuel efficiency and emissions. The two-stroke cycle doesn't allow for complete combustion of fuel, leading to oil and fuel consumption. This, coupled with the absence of a lubrication system separate from the fuel, makes the engine less efficient and environmentally friendly than a four-stroke engine.

Design and Power Output

The 1960 BMW Isetta's engine was air-cooled, which meant it didn't require a complex cooling system, further simplifying its design. It was also capable of producing 12 horsepower and could propel the Isetta to a top speed of around 46 mph (74 km/h), which was quite impressive for its time.

Isetta - Chassis Restored
Isetta - Chassis Restored
the front end of a yellow motorcycle engine
the front end of a yellow motorcycle engine
BMW Isetta Classic Cars for Sale | Classic Trader
BMW Isetta Classic Cars for Sale | Classic Trader

The engine's power output might seem modest by today's standards, but it was more than sufficient for the tiny, lightweight Isetta. With a body made largely of aluminum and a weight of just 570 lbs (260 kg), the Isetta could reach speeds of 46 mph (74 km/h) quite easily. The engine, while small, was well-suited to the Isetta's role as an economical, city-oriented vehicle.

Maintenance and Reliability

The Isetta's engine, due to its simplicity, was relatively easy to maintain. The fact that it shared many components with the BMW R27 motorcycle, which was also powered by the same engine, made maintenance even easier. Many parts were interchangeable, and finding replacements was relatively straightforward.

AD

However, the two-stroke engine's requirement for a mix of oil and fuel could make maintenance slightly more complicated. The engine also required regular re-networks, as the wear on two-stroke engines is typically faster than that on four-strokes. Despite these aspects, the Isetta's engine was reliable, and many original examples still run today, a testament to their robustness.

BMW Isettta 300 Engine Running
BMW Isettta 300 Engine Running
The Little BMW That Could - BMW 700 LS | The Online Automotive Marketplace | Hemmings, The World's Largest Collector Car Marketplace
The Little BMW That Could - BMW 700 LS | The Online Automotive Marketplace | Hemmings, The World's Largest Collector Car Marketplace
BZ
BZ
Little Bitty Bimmer: 1961 BMW 700 Coupe
Little Bitty Bimmer: 1961 BMW 700 Coupe
1960 BMW Isetta 300 for sale
1960 BMW Isetta 300 for sale
an advertisement for the bmw motorcycle engine
an advertisement for the bmw motorcycle engine

The Evolution of the Isetta Engine

As production of the BMW Isetta continued, so did the evolution of its engine. The original 247cc engine was later supplanted by a 297cc unit, which still retained the same two-stroke, single-cylinder design. This version of the engine could produce 13 horsepower and was used in the later versions of the Isetta.

In 1959, BMW also introduced the Isetta 300, which was powered by a 582cc engine derived from their commercial motorcycles. This engine was still a two-stroke single, but its larger displacement allowed it to produce 21 horsepower, significantly more than the earlier Isetta engines.

AD

The Isetta's Impact and Legacy

The BMW Isetta, with its novel engine and unique design, left an indelible mark on the automotive world. It was inexpensive to produce, easy to maintain, and offered affordable mobility to the masses. Its impact was so profound that it led to a wave of microcar production in Europe during the 1950s and 1960s.

an old motorcycle engine sitting on top of a counter in a kitchen next to wooden cabinets
an old motorcycle engine sitting on top of a counter in a kitchen next to wooden cabinets

Today, the Isetta is remembered as a pioneeringste, showcasing BMW's engineering prowess and adaptability in the face of post-war austerity. Its engine, while simple and dated by today's standards, was a testament to the power of ingenuity and innovation. The Isetta's story is a reminder that even the humblest of vehicles can leave a lasting legacy.

The 1960 BMW Isetta engine, though primitive by today's standards, embodies the spirit of innovative problem-solving that defined the mid-20th century automotive industry. As we look to the future of transportation, marked by electric vehicles and advanced powertrains, it's crucial to remember the humble beginnings that shaped our automotive heritage. The Isetta, and its unique engine, stand as a testament to that journey.

AD
AD