2017 BMW 5 Series Key Fob Battery Replacement
Experiencing lock issues with your 2017 BMW 5 Series? It might be time to replace the battery in your key fob. The good news is, you can do this easily and cost-effectively at home. Here's a step-by-step guide to help you through the process.
Before we dive in, let's understand why this is an issue that comes up from time to time. Like many modern keys, the 2017 BMW 5 Series' key fob uses a small, flat battery to power its features. Over time, these batteries depletion, leading to partial or complete loss of function. So, how can you tell if it's time for a replacement?
Identifying the Need for Battery Replacement
The most common symptom of a dying battery is reduced signal strength. You might notice that your BMW кеу fоb responds more slowly or unpredictably. Here are a few scenarios to look out for:
- Delayed unlocking or locking of your car's doors.
- Inability to unlock doors from a distance.
- Issues with the remote start function, if equipped.
Other signs include flickering indicators, the locks not engaging at all, or even dead keys (meaning the button doesn't light up at all). If you're experiencing any of these situations, it's likely time to replace your key fob's battery.
Once you've determined that the battery needs replacing, the next step is choosing the right one. For your 2017 BMW 5 Series, you'll need a CR2032 coin cell battery, which is a common size for key fobs.
Replacing the Battery: A Step-by-Step Guide
Now that you have the right battery, it's time to get started. This process is relatively straightforward, but it requires a small amount of patience and the right tools. Here's what you'll need:
- Your 2017 BMW 5 Series key fob
- A new CR2032 battery
- A small screwdriver (Flathead or Phillips, depending on your key fob's screw type)
- Magnetized screws to keep everything in place (optional, but helpful)
Preparation
Before you start, find a well-lit area to work in and ensure you're working on a flat surface. Also, gather your tools together to avoid fumbling around for them later. To avoid dropping any small parts, consider using a heat-resistant tray or working on a clean countertop.
Opening the Key Fob
To access the battery compartment, you'll first need to remove the key fob's back cover. This is typically held on by a small screw. Using your screwdriver, slowly and carefully unscrew the cover. Be gentle to avoid stripping the screw or damaging the plastic. Once the screw is out, you should be able to pry the back cover off using a flathead screwdriver. If your key fob has a release button, press it gently to release the cover.
With the back cover off, you'll see the battery. Before removing it, note its orientation. The negative side (usually marked with a '-' or '-' symbol) should be facing up when you replace it.
Removing the Old Battery
Use the tip of your screwdriver to carefully pry the battery out. It might be slightly wedged in, so be patient. If you're having trouble, you can use a pair of needle-nose pliers, taking care not to bend or damage the battery.
Once the old battery is out, take the new CR2032 battery and align it according to the notes you made earlier. The flat side of the battery should face down, and the positive side should be on top.
Installing the New Battery
Position the new battery in place and gently press it down until it clicks into place. Make sure it's fully seated and that the positive and negative ends are aligned correctly.
Reassembling the Key Fob
Now that the new battery is in place, it's time to put the key fob back together. Start by placing the back cover onto the key fob. If it has a release button, ensure that's properly lined up. Then, gently screw the cover back on. If you're using a magnetized screw, it should help guide the screw back into the hole correctly.
Once the cover is secure, test your key fob's functions to ensure everything's working properly. If the lock buttons do nothing, your battery might not be correctly aligned, or you might have the wrong battery. Carefully open the key fob again to check.
If everything works as expected, congrats! You've successfully replaced the battery in your 2017 BMW Series 5 key fob. This should restore full function to your key fob, resolving any lock issues you were experiencing. With proper care, your new battery should last about 3-4 years under normal use.
So, there you have it – a simple, step-by-step guide to replacing your 2017 BMW Series 5 key fob battery at home. Happy DIYing, and drive safe!