2017 Hyundai Sonata Door Handle Replacement: Easy Steps
Is your 2017 Hyundai Sonata's door handle acting up? You're not alone. While Hyundai Sonatas are known for their reliability, components like door handles may wear out over time. Don't let this minor issue cause bigger problems—learn how to replace your 2017 Hyundai Sonata's door handle with our comprehensive, step-by-step guide.
Before you start, ensure you have the necessary tools and parts. You'll need a flathead screwdriver, a Torx T20 driver, a trim removal tool, new door handles, and about an hour of your time. Let's dive into the process.
Preparation and Door Panel Removal
The first step is to prepare your Sonata for the replacement. This involves removing the door panel, which gives you access to the door handle mechanism.
Start by opening the door and locate the pull tab on the lower edge of the door panel. Pull this tab to release the retaining clips. Next, use a trim removal tool to gently pry off the door panel, starting from the bottom and working your way up. Once the clips are released, carefully set the door panel aside.
Removing the Old Door Handle
With the door panel removed, you can now access the door handle. Begin by disconnecting the electrical connector from the door handle by squeezing the locking tab and pulling the connector away.
Next, use a flathead screwdriver to remove the hex nut that secures the handle to the door. Once the nut is removed, pull the handle away from the door to release it. If the handle resists, you may need to gently pry it out using a flathead screwdriver or a similar tool. Remember, patience is key here to avoid damaging the door or the handle itself.
Installing the New Door Handle
Before installing the new door handle, compare it to the old one to ensure they're the same type. The new handle should come with a new hex nut. If not, reuse the old nut.
Position the new handle against the door, aligning the mounting holes with the door's holes. Insert the mounting screw and secure it with the hex nut, tightening it by hand until snug. Use a Torx T20 driver to fully tighten the nut, being careful not to overtighten and strip the mounts.
Reinstalling the Door Panel and Final Checks
With the new door handle securely fastened, it's time to reinstall the door panel. Firstly, reattach the electrical connector to the new handle, ensuring it locks securely into place.
Next, align the door panel with the door and press it into place. Use your trim removal tool to snap the retaining clips back into place, starting from the top and working your way down. Make sure all clips are secure before testing the new handle.
Testing the New Door Handle
Gently pull the door handle to ensure it's functioning correctly. The door lock should engage and disengage smoothly. If the handle feels stiff or doesn't operate as expected, double-check that the electrical connector is securely attached and that the handle is properly aligned with the door.
Once you're satisfied with the new handle's performance, close the door and proceed to the driver's side to replace the other door handle, following the same steps to ensure symmetry in your Sonata's appearance.
There you have it—a smooth, hassle-free 2017 Hyundai Sonata door handle replacement. By following this guide, you've not only saved time and money, but you've also ensured your Sonata remains a reliable and safe vehicle. Happy wrenching!