2017 Toyota Corolla Grill Replacement: Step-by-Step
The 2017 Toyota Corolla's durable and stylish front end is a defining feature, but accidents and wear can take their toll. Replacing the grill can restore its original appearance and ensure optimal performance. Here's a comprehensive guide on '2017 Toyota Corolla grill replacement' to help you through the process.
Before you dive in, remember that safety is paramount. Always follow the manufacturer's instructions and double-check with a professional if you're unsure about any step. Now, let's get started.
Understanding Your 2017 Toyota Corolla Grille
The 2017 Toyota Corolla's front bumper and grille are two separate parts, with the grille sitting behind the bumper. Replacing the grille involves removing the bumper first, so understanding this relationship is crucial.
Your Corolla's grille is made of high-quality plastic, designed to withstand minor impacts. However, severe collisions or neglect can damage it, necessitating replacement.
Tools and Materials Needed
Before you begin, gather these tools and materials:
- New grille assembly
- Pruning shears
- Flathead screwdriver
- Socket wrench
- Ratchet
- Tape measure
- Penetrating oil (like WD-40)
- Replacement fasteners (if needed)
Removing the Old Grille
Once you have everything ready, start by parking your Corolla on a flat surface and engaging the parking brake.
Pop the hood and locate the three screws holding the engine cover in place. Remove these screws and set aside the engine cover. Now, proceed to the front of the car.
Locate the two clips at the base of the front bumper, near the tire fender liners. Use pruning shears to carefully cut these clips.
Next, remove the four nuts securing the front bumper to the car using a 10mm socket and ratchet. Once the nuts are off, pull the bumper away from the car to release the retaining tabs. Set the bumper aside.
Now, locate the grille's six clips. Use a flathead screwdriver to pry these clips off gently. With the clips removed, pull the grille away from the car to disengage it from the retainers. Your old grille is now ready to be replaced.
Installing the New Grille
General Motors sells 2017 Toyota Corolla grilles as a complete assembly, including the fasteners. Before installation, inspect the new grille to ensure all components are intact and free of damage.
Position the new grille in place, starting from the top. Snap the grille onto the retainers, ensuring it's securely fastened. Once the grille is in place, reattach the front bumper, following the reverse process you used to remove it.
Reinstall the engine cover, ensuring the screws are tightened securely. Lastly, test the grille's functioning by starting the car and checking the coolant fan, ensuring it operates correctly.
Final Touches and Safety Checks
Once your new grille is securely in place, give your Corolla a quick clean to remove any debris from the replacement process.
Before hitting the road, perform a thorough safety check. Ensure all lights are functioning, and the coolant fan works correctly. Drive your Corolla at low speeds, like in a parking lot or a quiet neighborhood, to ensure no rattles or unusual noises emanate from the front end.
There you have it - a safe, thorough replacement of your 2017 Toyota Corolla's grille. Regularly inspect your Corolla's front end to ensure all components are in tiptop shape, maintaining its safety and your peace of mind on the road.