2019 toyota highlander transmission fluid change

2019 Toyota Highlander Transmission Fluid Change: Step-by-Step Guide

By Laura King
AD

When it comes to maintaining the longevity and performance of your 2019 Toyota Highlander, regular upkeep of its transmission system is paramount. One crucial aspect of this maintenance is monitoring and changing the transmission fluid at the recommended intervals. This article will guide you through the process of a 2019 Toyota Highlander transmission fluid change, ensuring you keep your SUV running smoothly.

Toyota recommends changing the transmission fluid and filter in the 2019 Highlander every 100,000 miles or 60 months. However, it's essential to consult your vehicle's owner's manual for the most accurate guidance, as driving conditions can vary significantly. Regular transmission fluid changes help prevent potential issues, such as gear slipping, rough shifting, and even transmission failure.

Preparation and Gathering Tools

Before you begin, ensure you have all the necessary tools and components. You'll need a drain pan, a 17mm socket wrench, a funnel, new Toyota Genuine or Toyota-approved Type T-IV or T-IV Plus transmission fluid (about 4.2 quarts), and a new transmission filter.

AD
🔧 2017-2019 Toyota Highlander transmission fluid change UA80E *the right way to fill*
🔧 2017-2019 Toyota Highlander transmission fluid change UA80E *the right way to fill*
How to Change Transmission Fluid with no Dipstick (toyota)
How to Change Transmission Fluid with no Dipstick (toyota)
Toyota Highlander How To Change Spark Plugs [2014 To 2019] 2GR-FKS 3.5L V6 Engine With Part Numbers
Toyota Highlander How To Change Spark Plugs [2014 To 2019] 2GR-FKS 3.5L V6 Engine With Part Numbers

It's crucial to use the recommended fluid and filter to maintain optimal performance and prevent damage to the transmission. Pre-mixing the new fluid with the old, used fluid isn't recommended for the Highlander, as it can potentially negatively impact the transmission's performance.

Accessing the Transmission Fluid and Filter

First, make sure your Highlander is on a level surface and has cooled down for at least 30 minutes to prevent any potential burns. You'll find the transmission fluid fill hole and the drain plug underneath the vehicle, on the side of the engine bay nearest the passenger side.

How to change your Toyota Sealed Transmission Fluid
How to change your Toyota Sealed Transmission Fluid
Toyota Highlander How To Change Mass Air Flow Sensor 2014 To 2019 3rd Generation With Part Numbers
Toyota Highlander How To Change Mass Air Flow Sensor 2014 To 2019 3rd Generation With Part Numbers
the dashboard of a car with two speedometers
the dashboard of a car with two speedometers

Remove the DNA (Drain Plug) that doubles as a dipstick, using your 17mm socket wrench. Remember to keep track of the washer and O-ring on the plug to avoid losing them during the process.

Draining the Fluid and Old Filter

With the DNA removed, locate the transmission pan and place your drain pan underneath it. Using your socket wrench, loosen and remove the pan's bolts in a specific pattern, starting at the central bolts and then moving to the outer bolts. This will ensure the pan doesn't warp upon removal.

AD

Once the pan is off, allow the fluid to drain completely. It may take a few minutes, and you might want to use a turkey baster or a compressed air can to speed up the process. After all the fluid has drained, remove the old filter and dispose of it with the used fluid.

2019 Toyota Highlander Hybrid
2019 Toyota Highlander Hybrid
Transmission Oil Cooler For 2017- 2019 2018 Toyota Highlander 3.5l V6 329100e070
Transmission Oil Cooler For 2017- 2019 2018 Toyota Highlander 3.5l V6 329100e070
THE SUPER AWESOME TOYOTA HIGHLANDER
THE SUPER AWESOME TOYOTA HIGHLANDER
Toyota Highlander | Luxurious Interior
Toyota Highlander | Luxurious Interior
How To Drain And Fill Transmission Fluid On The 5th Gen 4Runner
How To Drain And Fill Transmission Fluid On The 5th Gen 4Runner
2019 Toyota Highlander XLE
2019 Toyota Highlander XLE

Installing the New Filter and Fresh Fluid

Before installing the new filter, ensure it's clean and examine the pan for any debris or damage. If necessary, clean it gently with a lint-free cloth and some transmission fluid before reinstalling it.

Coat the new filter's rubber gasket with a small amount of new transmission fluid to create a better seal and lubricate it. Carefully install the filter, ensuring it's properly seated and facing the correct direction as indicated by an arrow or the word "UP."

AD

Refilling the Transmission Fluid

Reinstall the pan, but don't fully tighten the bolts yet. Add 3.5 quarts of the new transmission fluid through the fill hole using a funnel. Start your engine and let it idle, allowing the fresh fluid to circulate.

Once the transmission has reached operating temperature, turn off the engine and let it sit for a few minutes to allow the fluid to settle. Check the fluid level using the DNA (Drain Plug) and add more fluid if necessary, up to the "FULL" mark. Be sure not to overfill the transmission.

Final Touches and Verification

With the correct fluid level achieved, fully tighten the pan bolts in the reverse order you removed them (starting with the outer bolts) to ensure an even and secure fit. Don't overtighten, as this can lead to warping or damage.

AD

After allowing the vehicle to sit for a few more minutes, recheck the fluid level and verify that there are no leaks around the pan or drain plug. Take your 2019 Toyota Highlander for a short test drive, ensuring it shifts smoothly and exhibits no signs of unusual behavior.

Congratulations! You've successfully completed your 2019 Toyota Highlander transmission fluid change. Regular maintenance like this helps ensure your Highlander provides you with many miles of reliable and enjoyable use. Don't forget to reset the maintenance reminder system on your dashboard, if applicable. Happy driving!

AD