2020 toyota 4runner fog light replacement

Easy DIY: 2020 Toyota 4Runner Fog Light Replacement

By Olivia Young
AD

Driving through dense fog with a 2020 Toyota 4Runner, you might wish for better visibility. Upgrading your fog lights is a cost-effective way to improve safety and assurance on the road. This guide walks you through replacing your 2020 Toyota 4Runner's fog lights step-by-step.

Preparation and Tools

Before you begin, gather the necessary tools and replacement parts.

You'll need:

  • A screwdriver (Phillips #2 or #3)
  • Socket wrench
  • 10mm and 12mm sockets
  • Replacement fog light bulbs and assembly

Accessing the Fog Light Housing

Begin by opening your 4Runner's hood and locating the fog light housing, typically behind a plastic cover or under a grill.

Remove any protective coverings, then use a screwdriver to unscrew the fog light housing, which is usually held in place by a single screw or two.

Removing the Old Fog Light

Before removing the old bulb, turn off your vehicle's engine and disconnect the negative battery cable to avoid any electrical shorts.

Carefully pull out the old bulb from the fog light housing. The bulb is connected to a wiring harness; gently remove it, ensuring you don't damage the terminals.

Installing the New Fog Light Bulb

Before installing the new bulb, ensure it matches your 4Runner's specifications. Standard sizes are H11 or 9005.

Insert the new bulb into the fog light housing, following this:

  • For H11 bulbs: The base of the bulb goes into the socket's twin prongs, ensuring the bulb faces the correct direction before pushing it in.
  • For 9005 bulbs: Align the bulb's flat sides with the slot on the socket and press it in.

Securing the Fog Light Assembly

Once the bulb is securely in place, reattach the wiring harness, ensuring a Firm connection.

With the bulb and harness secured, reinsert the fog light assembly into the vehicle's fog light housing and reinstate the screw or screws to secure it.

Reassembling the Exterior Components

Reattach any plastic covers or grills you removed initially, ensuring everything is tightly secured.

Reconnect the negative battery terminal, ensuring all electrical connections are sound.

Now, start your 2020 Toyota 4Runner and test the new fog lights to confirm they're functioning correctly. Performing this task ensures your 4Runner is well-equipped to handle foggy conditions safely. Regular upkeep like this can significantly enhance your vehicle's performance and longevity. Stay safe on the road!"

14-20 Toyota 4Runner Lighting
14-20 Toyota 4Runner Lighting
Toyota 4Runner (5th Gen) Fog Light Fangs
Toyota 4Runner (5th Gen) Fog Light Fangs
Toyota 4Runner Headlight Bulb Replacement
Toyota 4Runner Headlight Bulb Replacement
4Runner Triple Fang Lights
4Runner Triple Fang Lights
Lamin-X Filters on Aftermarket Fog Lights for the 5th Gen 4Runner
Lamin-X Filters on Aftermarket Fog Lights for the 5th Gen 4Runner
For 2014 - 2020 Toyota 4runner Limited Front Bumper Fog Light Driving Side Lh
For 2014 - 2020 Toyota 4runner Limited Front Bumper Fog Light Driving Side Lh
NEW Cali Raised 4R Fog Lights!
NEW Cali Raised 4R Fog Lights!
Baja Design Squadron Fog Light install 5th Gen 4Runner
Baja Design Squadron Fog Light install 5th Gen 4Runner
Baja Design Squadron Fog Light install 5th Gen 4Runner
Baja Design Squadron Fog Light install 5th Gen 4Runner
4Runner Lifestyle Triple Fang Lights For 4Runner (2014-2024) - AMBER
4Runner Lifestyle Triple Fang Lights For 4Runner (2014-2024) - AMBER
the front end of a white car with its lights on
the front end of a white car with its lights on
Lamin-X Fog Light Covers For 4Runner (2014-2024) - BLUE
Lamin-X Fog Light Covers For 4Runner (2014-2024) - BLUE
AD