Update BMW E60 Key Battery: Step-by-Step Replacement Guide
Is your BMW E60 key fob not working as it used to? The issue might be a dying battery. Replacing it is a straightforward process, saving you the cost and inconvenience of a trip to the dealership. Here's a comprehensive guide on how to replace the battery in your BMW E60 key fob.
Before you start, ensure you have the following tools and materials: a small flathead screwdriver, a CR2032 battery (the same type removed from the key fob), and an alternative way to start your BMW E60, such as a spare key or the valet mode.
The Disassembly Process
Replacing the battery involves disassembling your key fob. Let's start by separating the key fob's two halves.
Using the flathead screwdriver, gently insert it into the small hole on the side of the key fob. Push in until you hear a clicking sound, indicating that the internal latch has been released. Then, carefully pry the two halves apart.
Removing the Battery Cover
Once separated, you'll see a small battery cover on one half of the key fob. Use the flathead screwdriver to remove this cover by prying it up from one end.
With the cover removed, you'll now have access to the battery compartment, revealing the CR2032 battery. Make sure to note the battery's orientation before removing it, as it must be replaced with the same exact position.
Removing the Old Battery
Carefully use your fingernail or the flathead screwdriver to gently lift the battery out of its compartment. Ensure you don't bend or damage the battery terminals to prevent short circuits.
After removing the old battery, double-check that the battery compartment is free of any debris, ensuring a proper fit for the new battery.
Installing the New Battery
Now that the old battery is out, it's time to insert the new CR2032 battery into the key fob.
Again, be sure to align the new battery correctly, matching its position with the old battery. The positive side of the battery should face the same direction as it did in the original.
Reassembling the Key Fob
Once the new battery is securely in place, carefully reattach the battery cover using the tabs on the cover to snap it back into place.
The next step is to reattach the two halves of the key fob. Align the sides properly, then press the halves together firmly until you hear the latch click back into place.
Testing the New Battery
Before you test the key fob, ensure your BMW E60 is unlocked and outside (or next to an open window if it's too cold). Testing inside the vehicle might cause it to lock and unlock repeatedly, potentially draining the new battery.
Now, try locking and unlocking your car using the key fob. If the battery was the issue, your E60 should now respond as normal.
That's it! You've successfully replaced the battery in your BMW E60 key fob. By following these steps, you should now be back on the road without any key-related issues. If you still encounter problems, it might be best to consult a professional. Happy driving!