bmw f650 clutch replacement

BMW F650 Clutch Replacement Guide: Easy Steps & Cost

By Jessica Thomas
AD

When it comes to motorcycle maintenance, the clutch is a crucial component that deserves regular attention. The BMW F650, with its robust and reliable engine, is no exception. Today, we're diving into the heart of your motorcycle, guiding you through a comprehensive, step-by-step process for a BMW F650 clutch replacement.

Before we dive in, let's address why you might need to replace your clutch. High mileage, improper lubrication, and excessive wear can all lead to clutch failure. A slipping clutch, difficulty shifting gears, or a burning smell are all indicators that it might be time for a new one. Now, let's get started.

Understanding the BMW F650 Clutch System

The BMW F650's clutch system is a multi-plate, wet-clutch design, which means it's immersed in oil for cooling and lubrication. It comprises several components: the clutch lever, the master cylinder, the clutch cable, the pressure plate, the clutch plate pack, and the release mechanism. Understanding each component's role is key to a successful replacement.

AD
BMW F650GS Motorcycle Clutch Change Step By Step
BMW F650GS Motorcycle Clutch Change Step By Step
43+ Bmw Motorcycle Clutch Replacement Gif
43+ Bmw Motorcycle Clutch Replacement Gif
Transmission Removal Clutch Replacement diy Quick Version
Transmission Removal Clutch Replacement diy Quick Version

Before we begin, safety is paramount. Ensure your motorcycle is on a stable stand, and always follow manufacturer guidelines. Let's proceed with gathering our tools and parts.

Required Tools and Parts

To replace the clutch on your BMW F650, you'll need the following tools and parts:

BMW K1200LT Clutch Fluid Flush and Maintenance DIY
BMW K1200LT Clutch Fluid Flush and Maintenance DIY
Other Modifications
Other Modifications
XS650: Clutch Assembly
XS650: Clutch Assembly
  • Socket wrench set (8mm, 10mm, 12mm, 14mm, 17mm)
  • Spark plug socket
  • Extension and universal joint for your socket wrench
  • Pliers and a small screwdriver
  • New clutch plate pack
  • New clutch cable (if necessary)
  • New clutch master and slave cylinders (if necessary)

Preparation: Disassembling the F650

Before you start, it's a good idea to disconnect the negative battery terminal to prevent any electrical shorts. Then, drain the engine oil and remove the oil filter. After that, remove the exhaust pipe and any other components blocking access to the clutch. With the engine exposed, you're ready to start removing components.

Using your socket wrench, remove the clutch cover bolts. Support the engine using a jack or a suitable tool to avoid putting too much strain on the components. Remove the crankcase inspection cover, then remove the clutch release mechanisms. With these steps complete, you're ready to access the clutch plate pack.

AD

Removing and Inspecting the Old Clutch

Using your socket wrench, carefully remove the clutch pressure plate. Then, remove the clutch plate pack. Inspect all components for wear and ensure they're recorded as used in your repair log.

Upgraded Brakes and Clutch with DP-Brakes
Upgraded Brakes and Clutch with DP-Brakes
Clutch replacement part 2: clutch refitting
Clutch replacement part 2: clutch refitting
BMW F650 GS Oil Change DIY
BMW F650 GS Oil Change DIY
Engine clutch alignment tool for bmw m47
Engine clutch alignment tool for bmw m47
a man is working on an engine in his garage with the gear attached to it
a man is working on an engine in his garage with the gear attached to it

Before installing the new clutch, it's crucial to ensure your engine is cleaned thoroughly. Remove all traces of old oil and dirt to prevent contamination of the new clutch. Also, inspect the clutch release mechanism and replace it if necessary.

Installing the New BMW F650 Clutch

The installation process is a reverse of the removal. First, install the new clutch plate pack, making sure to align the notches on the plates and thank disc. Then, install the new clutch pressure plate using the factory-rated torque specified in your repair manual. Ensure you use the correct clutch plate pack for your motorcycle's model year and mileage.

AD

Before reinstalling the clutch cover, check that the clutch release mechanism is functioning correctly. Once satisfied, reinstall the clutch cover and the other components you removed earlier. Don't forget to replace the oil filter and drain plug, then refill the engine with fresh oil.

Post-Installation and Test Ride

After reassembling your motorcycle, give it a thorough once-over to ensure everything is tightened up properly. Reconnect your battery and take your motorcycle for a test ride, gradually increasing the throttle and RPM to ensure your new clutch is functioning correctly.

Post-ride, inspect your engine for any leaks or unusual wear. If everything checks out, your BMW F650 is ready to hit the road with a new, functional clutch.

AD

Regular maintenance is key to ensuring your BMW F650 runs smoothly for years to come. Remember to keep your clutch lubricated and regularly inspect its components. If you ever have any doubts about a repair, don't hesitate to consult a professional mechanic.

AD