bmw f650gs brake pad replacement

BMW F650GS Brake Pad Replacement: Step-by-Step Guide

By Daniel Jones
AD

When it comes to BMW's F650GS, maintaining its peak performance and safety requires regular check-ups and timely replacements of key components, such as brake pads. Brake pads are critical for ensuring your motorcycle's stopping power and safety. This comprehensive guide will walk you through the process of replacing BMW F650GS brake pads, providing you with sure-footed confidence and peace of mind.

Before we dive into the process, it's crucial to understand that replacing brake pads should be a part of your regular motorcycle maintenance routine. There's no fixed miles or time interval for this task; rather, it's based on wear and tear. Inspect your brake pads periodically to ensure they're still in good shape and not worn down to the minimum allowed thickness, usually around 1mm. If you notice any unusual brake behavior or hear a high-pitched squeal when applying the brakes, it's time for a change.

Tools and Materials Needed

To perform a BMW F650GS brake pad replacement, you'll need the following tools and materials:

AD
F650GS Braking System
F650GS Braking System
BMW F650GS Motorcycle Clutch Change Step By Step
BMW F650GS Motorcycle Clutch Change Step By Step
F650GS Footpeg Positioning
F650GS Footpeg Positioning

  • New brake pads, compatible with your bike's model and year (e.g., BMW F650GS brake pads)
  • Screwdriver and/or Allen wrench
  • Brake pad spreader tool (optional but recommended)
  • Mechanic's gloves
  • Protective goggles
  • Grease or anti-seize compound

Other Modifications
Other Modifications
Just a girl😭
Just a girl😭
BMW F650 GS Oil Change DIY
BMW F650 GS Oil Change DIY

Front Brake Pad Replacement

Start by removing the front wheel and brake caliper. On the F650GS, this involves removing the axle nut, lowering the suspension, and then pulling off the wheel. Set the caliper aside; you don't need to remove it from the swingarm. Proceed by:

AD
  1. Pinching the brake pad pistons back into their bores using a C-clamp or brake pad spreader tool. Be careful not to damage the pistons.
  2. Removing the old brake pads from the caliper.
  3. Cleaning the caliper and brake pad mounting area.
  4. Applying a light coat of grease or anti-seize compound to the backside of the new brake pads and the caliper's piston bore.
  5. -installing the new brake pads by pushing the pistons back into the caliper using the spreader tool and securing the pads with the appropriate hardware.

Do It Yourself: How To Check and Replace Motorcycle Brake Pads - Women Riders Now
Do It Yourself: How To Check and Replace Motorcycle Brake Pads - Women Riders Now
Motorcycle Front Rear Brake Disc Rotors Fit For BMW F650 F 650 1993-2003 F650GS Dakar 650 1999-2008
Motorcycle Front Rear Brake Disc Rotors Fit For BMW F650 F 650 1993-2003 F650GS Dakar 650 1999-2008
How to Replace Disc Brake Pads
How to Replace Disc Brake Pads
BMW R1200RT/LC Replace Brake Pads
BMW R1200RT/LC Replace Brake Pads
How To Replace Disc Brake Pads On Your Bicycle
How To Replace Disc Brake Pads On Your Bicycle
Motorcycle Rear Brake Pads For BMW F650 F650CS G650X F650GS F650ST F700GS F750GS F800GS F850GS
Motorcycle Rear Brake Pads For BMW F650 F650CS G650X F650GS F650ST F700GS F750GS F800GS F850GS

Rear Brake Pad Replacement

The rear brake pad replacement process on the F650GS is similar but involves working with the rear wheel and caliper. Keep in mind that the rear brake pads may require you to remove the sprocket cover and chain, for easier access to the caliper:

AD
  1. Remove the rear wheel and expose the brake caliper.
  2. Using a brake pad spreader tool or pliers, carefully pull the brake pads away from the rotor, allowing the pistons to retract fully.
  3. Remove the old brake pads and clean the caliper.
  4. Apply grease or anti-seize compound to the backside of the new brake pads and the caliper's piston bore.
  5. Place the new brake pads in position, ensuring they align correctly with the caliper and rotor.
  6. Reinstall the brake pads and secure them with the appropriate hardware. Karelly ensure the caliper's pistons are fully pushed back into position.

Bmw Pivot Bearing Replacement
Bmw Pivot Bearing Replacement

Re- Bleeding the Brakes

After replacing the brake pads, it's essential to bleed your motorcycle's brakes to remove any air that may have entered the system:

AD

Preparation

Gather the required tools and materials, such as a brake bleeding kit, a helper to assist with the bleeding process, and fresh brake fluid compatible with your BMW F650GS.

Bleeding the System

Follow these steps to bleed your motorcycle's brakes:

  1. Locate the brake fluid reservoir and the brake bleeder screws on both the front and rear calipers.
  2. Clean the area around the bleeder screws to prevent contamination during the bleeding process.
  3. Open the brake fluid reservoir's cover and check the level of the brake fluid. Top up if necessary, ensuring that the fluid level is within the MIN and MAX marks on the reservoir.
  4. Connect the brake bleeding kit to the bleed nipple on one of the calipers and open the banjo bolt with a wrench. Ask your helper to firmly pump the brake lever a few times, pausing between pumps to observe any fluid displacement in the clear tubing of the bleeding kit. Once fluid starts moving, close the banjo bolt and loosen the bleeder screw slightly to release any air or old fluid.
  5. Repeat the process on the other caliper, ensuring you bleed the system evenly.
  6. Check the level of the brake fluid in the reservoir and top up if necessary. Continue bleeding until all air is expelled from the system and fresh brake fluid is visible in the clear tubing of the bleeding kit.
  7. Once complete, clean up the area, ensuring no contamination or mess remains around the brake components. Reinstall any removed covers or parts.

Regularly inspecting and maintaining your BMW F650GS's brakes is crucial to ensure your safety on the road. Performing a brake pad replacement and bleeding the system is a straightforward process that saves you money and keeps you in control of your motorcycle. If you're unsure about any part of the process, consult a professional mechanic or refer to your motorcycle's owner's manual. Safe riding!

AD