BMW R90/6 Valve Adjustment: Easy Steps for Classic Bike Lovers
The BMW R90/6, a classic from the motorcycle manufacturer's pre-BMW era, has gained a dedicated following among enthusiasts for its robust design and impressive performance. Regular maintenance, including valve adjustment, is crucial for preserving the bike's optimal performance and reliability. This guide will walk you through the process of adjusting the valves on your BMW R90/6, ensuring you maintain your motorcycle's vintage charm and powerful engine.
Before we dive into the process, it's essential to understand that your BMW R90/6 has both inlet and exhaust valves. The inlet valves feed air into the cylinders, while the exhaust valves expel spent gases. Both valve types need periodic adjustment to maintain proper clearance, ensuring optimal engine performance and longevity. The manufacturer recommends checking these clearances every 6,000 miles or 10,000 km, or once a year, whichever comes first.
Preparation and Tools
Before you begin, ensure you have the following tools at your disposal: a valve adjustment tool, a feeler gauge, a socket set, an ordinary screwdriver, some acyclic grease, and a new set of valve adjustment lock nuts. It's also a good idea to have a repair manual for your specific model, as some details may vary.
Start by allowing your motorcycle to cool down for at least one hour to prevent any burns. Once cooled, locate the valve cover on the cylinder head. Remove the eight bolts from the valve cover using your socket set, and gently lift the cover off. Be cautious of the gasket, as it may stick to the cover or the head.
Inlet Valve Adjustment
Locate the inlet valve rocker arms, which are the ones closest to the frontal part of the cylinder head. Here, you'll find a small slot on each rocker arm where you can insert your valve adjustment tool.
With the engine stationary, use your screwdriver to gently rotate the engine by hand until the number '1' is visible on both camshafts, indicating the cam lobes are fully closed. Using your feeler gauge, measure the inlet valve clearance and compare it with the manufacturer's specified clearance. If adjustment is needed, turn the exhaust rocker arm adjustment screw clockwise or counterclockwise to achieve the correct clearance.
Exhaust Valve Adjustment
Now, move on to the exhaust valves, located farther from the frontal part of the cylinder head. Similar to the inlet valves, gently rotate the engine until the number '1' is visible on the camshafts to close the cam lobes fully.
Measure the exhaust valve clearance following the same process as the inlet valves. If the clearance does not meet the manufacturer's specification, adjust the exhaust valve rocker arm adjustment screw until the correct clearance is achieved.
Final Steps and Reassembly
Once you've correctly adjusted both valve types, it's time to reinstall the valve cover. First, apply a bead of RTV silicone sealant around the cover's perimeter, ensuring an even spread.
Carefully position the valve cover back onto the cylinder head, and replace the eight bolts. Tighten them in a crisscross pattern, twisting them by hand at first, then tightening them further using your socket wrench. The manufacturer recommends aiming for a torque of around 5 Nm.
Recomplete your valve adjustment by installing new lock nuts and applying a thread of bicyclic grease to the threads. Finally, start the engine and allow it to warm up before checking the operation and rechecking the clearances one more time.
Congratulations! You've just successfully completed the valve adjustment process on your BMW R90/6. Regular maintenance like this ensures your vintage motorcycle keeps running smoothly and preserves its timeless appeal. Happy riding!