Max Out: BMW S1000RR Speed Limiter Removal Secrets
Unlocking the full potential of your BMW S1000RR isn't just about revving up the engine; it's about removing those pesky speed limiters. While these electronic governors may curb excessive speeds for safety and emissions compliance, they can also be a hindrance to track days or simply for spirited riding. This comprehensive guide will walk you through the process of removing the speed limiter from your BMW S1000RR, ensuring SEO-friendly text and engaging content that keeps you informed and safe.
Before we dive into the process, it's crucial to understand that removing the speed limiter voids your warranty and can potentially increase your insurance rates. Furthermore, it's your responsibility to follow local traffic laws and ride safely. Now, let's get started.
Understanding BMW Speed Limiters
BMW incorporates two speed limiters in their S1000RR models - the electronic speed limiter and the mechanical rev limiter. The electronic limiter, our focus here, is programmable through the bike's "Dynamic Traction Control" (DTC) menu. It's set to a default of 180 km/h (112 mph) for safety and emissions reasons. The mechanical rev limiter, on the other hand, physically limits the engine's RPM to prevent excessive wear.
In this article, we'll guide you through removing the electronic speed limiter, unlocking your S1000RR's full potential within safe and legal limits.
Preparation: Gather Your Tools
Before you begin, ensure you have the necessary tools: a T20 Torx screwdriver, a 12mm bolt wrench, and a BMW diagnostic tool (INPA) or a generic motorcycle diagnostic tool that supports BMW systems. If you're using a generic tool, ensure it's compatible with your bike's model year.
Additionally, have a friend assist you as you'll need someone to operate the diagnostic tool while you perform certain actions.
Accessing the DTC Menu
The DTC menu, where you'll remove the speed limiter, is accessed via the bike's onboard computer. Start by removing your seat, airbox, and fuel tank - follow your bike's specific disassembly process here. Once done, you'll expose the diagnostic plug under the engine's recoil starter.
Connect your diagnostic tool, align the sensors, and connect your friend with the tool at the handlebars. To access the DTC menu, follow these steps:
- Turn the ignition to 'On' (don't start the engine).
- Press and hold the '+' and 'OK' buttons on the Lamba display until the DTC menu appears.
Removing the BMW S1000RR Speed Limiter
Now that you're in the DTC menu, it's time to remove the speed limiter. This process is specific to each S1000RR model year, so ensure you're following the right instructions for your bike. Here, we provide a general outline:
Using the diagnostic tool, navigate to the 'Settings' menu, select 'Dynamic Traction Control', and then 'Speed Limit'. Here, you should see the current speed limiter setting. To remove it:
- Highlight the 'Speed Limit' option and press 'OK'.
- Using the '+' or '-' buttons, adjust the speed limit to the maximum you're comfortable with (usually 255 km/h or 158 mph for track use). Be mindful of local laws and your bike's capabilities.
- Press 'OK' to confirm, then 'Return' to exit the menu. Disconnect your diagnostic tool.
Reassembly and Testing
Reassemble your bike, following the reverse order of disassembly. Start the engine and test your bike's speedometer against a known reference to confirm the limiter is removed.
Initially, you might feel a lack of restriction when accelerating. Remember, though, your bike's full power is now unleashed, requiring more control and attention. Be cautious during the break-in period to avoid straining your engine.
Now that you've removed the speed limiter from your BMW S1000RR, you're ready to experience its full power. Always ride responsibly, respect local laws, and ensure you're comfortable pushing the limits of your bike.