2017 Toyota Yaris iA Brake Fluid Replacement: Top Choices & How-To
When maintaining your 2017 Toyota Yaris iA, it's essential to regularity check the brake system. In particular, monitoring the brake fluid is crucial for ensuring optimal performance and safety. But with so many types of brake fluid available, it's natural to wonder which one is suitable for your vehicle.
Toyota recommends using DOT 3 or DOT 4 brake fluid for the 2017 Yaris iA. This guide will delve into understanding your vehicle's brake fluid requirements, the differences between DOT 3 and DOT 4, and tips on how to check and maintain the brake fluid levels.
Understanding Brake Fluid for Your 2017 Toyota Yaris iA
Brake fluid is a hydraulic fluid that transfers force applied to the brake pedal to the vehicles' brakes. It's incompressible, which allows it to efficiently convert the pressure from the pedal into force on the brake components.
Two common types of brake fluid are DOT 3 and DOT 4. Both are compatible with your 2017 Toyota Yaris iA, but each has its unique properties.
DOT 3 Brake Fluid
DOT 3 brake fluid is the most common type, designed for standard everyday driving conditions. It has a lower boiling point compared to DOT 4, around 205-230°F (96-110°C). However, it's also less hygroscopic, meaning it absorbs less moisture, which can degrade the brake fluid over time.
While DOT 3 is suitable for most driving conditions, it might not be the best choice if you frequently drive in severe conditions or with high brake use, like towing or racing. In such cases, opting for DOT 4 brake fluid could provide better performance and safety.
DOT 4 Brake Fluid
DOT 4 brake fluid has a higher boiling point, around 246-275°F (119-135°C), compared to DOT 3. This higher boiling point gives it better resistance to high temperatures, making it ideal for vehicles with high brake demand or for driving in severe conditions.
Moreover, DOT 4 brake fluid is more hygroscopic than DOT 3, absorbing more moisture and reducing the risk of corrosion within the brake system over time. However, it may be more susceptible to brake fade, where the brake pedal loses its firmness due to excess heat.
Checking and Maintaining Brake Fluid Levels in Your Toyota Yaris iA
Regularly checking the brake fluid levels in your 2017 Toyota Yaris iA helps to maintain optimal performance and extend the life of the brake system.
Under the hood, locate the brake fluid reservoir, typically a clear, plastic tank. The minimum and maximum fluid levels are marked on the side of the reservoir. Ensure the fluid level is between these two marks.
Performing a Quick Brake Fluid Check
With the engine off and the vehicle on a level surface, open the hood and locate the brake fluid reservoir. Check the fluid level, and if the fluid level is low or at the minimum mark, it's time for a more thorough check.
If the brake fluid level is consistently low, or you've noticed changes in your vehicle's braking performance, it might be time to flush the brake system and replace the brake fluid.
Flushing and Replacing Brake Fluid
Brake fluid should be replaced every 2-3 years or 30,000-45,000 miles, depending on the driver's habits and conditions in which the vehicle is driven. Flushing and replacing the brake fluid removes moisture and other contaminants that can impair brake performance and corrode the brake system components.
Professional mechanics typically perform brake fluid flushes and replacements. The process entails removing the old brake fluid, cleaning the brake system, and refilling it with fresh brake fluid. Again, Toyota recommends using DOT 3 or DOT 4 brake fluid.
Regularly checking and maintaining your 2017 Toyota Yaris iA's brake fluid is integral to ensuring your vehicle's safety and performance. Understanding the differences between DOT 3 and DOT 4 brake fluids arms you with the knowledge to make informed decisions about your vehicle's upkeep.