changing spark plugs on bmw 328i

Changing Spark Plugs on BMW 328i: Step-by-Step

By Melissa Moore
AD

If you're a BMW 328i owner, at some point, you'll need to replace your spark plugs. Regularly changing spark plugs ensures your vehicle runs smoothly and maintains its performance. Here's a comprehensive guide on how to change spark plugs on your BMW 328i (E90, E91, E92, E93 models).

Changing spark plugs isn't a job for the faint-hearted, but with the right tools and knowledge, you can do it yourself. Let's dive in.

Preparation and Tools Needed

Before you start, gather the necessary tools and ensure you have everything ready.

AD
Every spark plug you pull out = 💰 Extra profit you're missing!
Every spark plug you pull out = 💰 Extra profit you're missing!
someone is changing spark plugs on a car's engine with the words, won't start? change spark plugs
someone is changing spark plugs on a car's engine with the words, won't start? change spark plugs
How To Gap Iridium Spark Plugs – Become A Mechanic Yourself!
How To Gap Iridium Spark Plugs – Become A Mechanic Yourself!

The tools you'll need include:

  • Spark plug socket (14mm)
  • Spark plug gap gauge
  • Anti-seize compound
  • New spark plugs (acquiring the original BMW plugs is recommended)
  • Anti-vibration (AVS) plug connectors (if yours are damaged)
  • A ratchet and extension, or a universal joint to reach the plugs
  • Needle-nose pliers
  • Mechanic's gloves

Spark Plug Codes Explained: Learn What Every Number Means
Spark Plug Codes Explained: Learn What Every Number Means
four different types of spark plugs on a blue background with the words spark plug condition chart below
four different types of spark plugs on a blue background with the words spark plug condition chart below
someone is holding the spark plug in front of their car's engine and looking at it
someone is holding the spark plug in front of their car's engine and looking at it

Locating the Spark Plugs

First, you need to access the spark plugs. The engine configuration in BMW 328i, inline-6 cylinder, means two spark plugs are located on each side of the engine.

Start by disconnecting the negative (-) battery cable. Then, remove the engine cover and any other necessary parts to access the valve cover, depending on your model year.

AD

Removing the Old Spark Plugs

Position the socket over the spark plug, and using a ratchet or socket wrench, gently turn counterclockwise to unscrew the plug. Use a little bit of force if necessary, but be careful not to damage the plug or the engine block.

How Tight Should Spark Plugs Be – What if They’re too Loose or Tight?
How Tight Should Spark Plugs Be – What if They’re too Loose or Tight?
DIY BMW E46 Sparkplug Removal and Installation
DIY BMW E46 Sparkplug Removal and Installation
Spark plugs
Spark plugs
an info sheet describing the different types of telephones and corded phones on display
an info sheet describing the different types of telephones and corded phones on display
Spark Plug
Spark Plug

Once the plug is loose, use your fingers or a pair of pliers to remove it completely. Be careful not to drop or lose any of the components. Also, take note of the condition of the old spark plugs, as this can give you insights into your engine's health.

Installing the New Spark Plugs

Now that you've removed the old spark plugs, it's time to install the new ones. Before installing, prepare the new plugs by applying a small amount of anti-seize compound to the threads.

AD

Using your spark plug socket and ratchet, gently thread the new plug into the engine. Remember to go slow and not overtighten. BMW recommends a torque of 25 Nm (18 ft-lbs) for new plugs.

Gapping the Spark Plugs

Spark plugs have a gap between the center electrode and the ground electrode. This gap needs to be within a certain range. The recommended spark plug gap for your BMW 328i is 1.0mm.

Use your spark plug gap gauge to check and adjust the gap if necessary. To adjust, gently bend the ground electrode with needle-nose pliers until you achieve the correct gap.

AD

Reinstalling the Components and Reconnecting the Battery

Once all spark plugs are securely in place, reattach any covers or components you removed to access the plugs. Finally, reconnect the negative battery cable.

Start your engine and let it run for a minute or two. Check for any warning signs or issues. If everything is functioning properly, congratulations! You've successfully changed the spark plugs on your BMW 328i.

Regularly maintaining your BMW 328i, including changing spark plugs, is key to preserving its performance and longevity. If you're unsure about any part of the process, consult a professional mechanic. Happy wrenching!

AD