Step-by-Step Guide: Change Battery in BMW Remote
If your BMW key fob suddenly won't lock or unlock your car, it might be time to replace its battery. Here's a simple guide on how to change the battery in a BMW remote key fob, ensuring your vehicle remains secure and convenient to use.
Before we dive into the process, you'll need a few tools within reach: a new battery (CR2032 3V is the standard for BMW), a flathead screwdriver, and some rubbing alcohol for cleaning the battery contacts.
Gathering Your Tools and Materials
First, make sure you have the right type of battery. For BMW key fobs, CR2032 3V lithium coin cells are typically used. You can find these batteries at many electronics stores or online retailers.
Next, gather your tools: a flathead screwdriver (often the thin kind that comes with eyeglasses repair kits works best) and some rubbing alcohol with a cotton swab. The alcohol will help clean the battery contacts, ensuring a strong connection with the new battery.
Preparing the New Battery
Before installing the new battery, double-check if it's the correct type for your BMW model. The model number should be printed on the battery or its packaging. Also, ensure it'sieniemation is the same as the old one; positive (+) should match positive, and negative (-) should match negative.
To further prepare, use a coin or another flat object to press gently on the center of the new battery to activate it. This process is called "priming" and ensures the battery starts working immediately after installation.
Removing the Old Battery
Start by locating the small keyhole on the back of your BMW key fob. Insert the flathead screwdriver into the keyhole, and gently turn it counter-clockwise to unlock the cover.
Once unlocked, carefully pry off the cover using the screwdriver or your fingernails. Inside, you'll find the old battery. Use the screwdriver to gently remove it from its compartment. Some key fobs may have a tiny flathead screw securing the battery; if so, remove it as well.
Cleaning the Battery Contacts
Before installing the new battery, clean the old battery's contacts and the ones in the key fob using a cotton swab dampened with rubbing alcohol. This step is crucial for ensuring a strong connection between the new battery and the key fob's circuit board.
A quick clean with a dry cotton swab after using the alcohol swab helps remove any residue and prepares the contacts for the new battery.
Inserting the New Battery
Carefully place the new battery into the battery compartment, ensuring its POSITIVE (+) side faces up. The battery should fit securely with no wobbling.
If your key fob had a tiny screw, replace and tighten it gently using the flathead screwdriver to secure the new battery. Reinstall the cover and snap it back into place, ensuring it's aligned correctly and locked securely.
Testing the New Battery
With the new battery installed, test your key fob by pressing the lock/unlock buttons. If the battery is properly seated and activated, your key fob should work immediately. If not, double-check that the battery is installed correctly, with the positive side facing up, and retry the test.
Finally, test both the-powered and passive features of your key fob, such as opening the trunk and starting the engine (if your BMW has a push-to-start system), to ensure everything is functioning correctly.
Congratulations, you've successfully changed the battery in your BMW remote key fob! Regularly inspecting and replacing the battery when needed will keep your key fob working perfectly and ensure you never get locked out again. If you have any further questions or encounter issues, don't hesitate to consult your owner's manual or contact a BMW professional for assistance.