Step-by-Step: Change Battery in Toyota Corolla Key Fob
Ever found yourself fumbling with your keys in the dark, only to realize your Toyota Corolla's key fob is dead? No need to panic; replacing the battery is a straightforward and cost-effective solution. Here's a comprehensive guide on how to change the battery in your Toyota Corolla's key fob, ensuring you're back on the road in no time.
The process is quite similar across different Corolla models, but the guide below is tailored for the 2015-2021 models. If you're dealing with an older model, the process might vary slightly. Always consult your vehicle's owner's manual if you're unsure.
Gathering Tools and Materials
Before you start, gather the necessary tools and materials. You'll only need a few items that are easy to find:
- CR2032 lithium coin cell battery (this is the standard battery size for Corolla key fobs)
- Small flathead screwdriver
- Tweezers (optional, for handling small parts)
Buying the Battery
CR2032 batteries are widely available at local electronic stores, auto parts shops, or online. They're inexpensive, typically costing less than $1 each. Ensure you buy the correct type; CR2032 has a diameter of 20mm and a thickness of 3.2mm.
Tip: Always buy a pack of several batteries. Key fobs require power frequently, and it's convenient to have spares on hand.
Removing the Key Fob Cover
Now that you have your tools and materials, let's disassemble the key fob. Be gentle; you don't want to damage anything.
Levering the Key Fob Cover
Insert the flathead screwdriver into the groove on one side of the key fob. Gently twist and pry the screwdriver to pop open the cover.
Tip: Start from the side with the button for unlocking doors. The cover is more likely to pop open from this side.
Separating the Key Fob Cover
Once the cover starts to pop open, use your fingers to gently pull it off. There may be a slight snap as the latch disengages. Don't force it; just let the cover come off naturally.
Replacing the Battery
The battery is now visible. Carefully pull it out using your fingers or tweezers. It's attached with a small piece of adhesive, which you can peel off if it comes with the battery.
Identifying Battery polarity
Before installing the new battery, double-check the polarity. The positive side of the new battery should match the position of the old one. It's crucial to install the battery correctly to avoid damage to the key fob circuit.
Installing the New Battery
Place the new battery in the key fob, ensuring the positive side is facing up. Push it gently into place until it seats correctly. You may need to use tweezers for this step.
Tip: If the battery doesn't fit, double-check you've removed the old battery correctly and there's no residue from the adhesive.
Reassembling the Key Fob
Now that the battery is replaced, it's time to put the key fob back together:
Aligning the Key Fob Cover
Slot the key fob cover back into place. Make sure it's aligned correctly; the button for unlocking doors should face outward.
Securing the Key Fob Cover
Push the cover down firmly but gently, ensuring it's securely snapped into place. Test the key fob buttons to ensure they work correctly.
Congratulations! You've successfully replaced the battery in your Toyota Corolla's key fob. You're now ready to back on the road.
Remember to dispose of used batteries responsibly. Lithium batteries should not be thrown in regular trash; instead, take them to a recycling center or give them to a store with a recycling program.
Next time your key fob batteries run out, you'll know exactly what to do. Happy driving!