Step-by-Step: How to Change BMW E90 Front Brake Pads
Changing the front brake pads on your BMW E90 can significantly improve safety and performance. Here's a step-by-step guide to help you through the process. Remember, regular maintenance is key to your vehicle's overall health.
Before starting, ensure you have all necessary tools and parts. You'll need a jack, jack stands, lug nut wrench, C-clamp, brake pad spreader, brake squeezer, and high-temperature tire flat repair kit. You'll also need new brake pads, which come in sets of two.
Preparation and Removing Old Brake Pads
First, engage the parking brake and use wheel wedges to prevent the vehicle from rolling. Then, use a lug nut wrench to loosen the lug nuts on your tire.
Jacking Up the Vehicle
Raise the vehicle using a jack, then secure it on jack stands. The car should be fully supported and stable before continuing.
Once secure, completely remove the wheel and tire, revealing the brake assembly.
Removing the Old Brake Pads
Locate the brake caliper and unscrew the two brake pad retention screws. These should be on the outside of the brake caliper and hold the brake pads into place.
Remove the outer brake pad, then after releasing the brake caliper piston using a brake squeezer, remove the inner brake pad.
Inspecting and Preparing for New Brake Pads
Inspect the caliper and rotor for any signs of damage. If the rotor has any grooves or uneven wear, it should be replaced. If the caliper is seized, it should also be replaced.
Installing the New Brake Pads
Clean the back of the brake caliper with a brake cleaner or rubbing alcohol to remove any rust or debris. This will prevent unnecessary noise and wear on your new brake pads.
Install the new outer brake pad. If the new pad doesn't fit perfectly, you may need to use a brake pad spreader to move the caliper piston back into position. Finally, reinstall the brake pad retention screws.
Reinstalling the Wheel and Tire
Reinstall the tire and wheel, ensuring the valve stem is in the correct position. Replace the lug nuts and perfect their torque as per your vehicle's manufacturer guidelines using a torque wrench.
Lower the vehicle and pump the brakes a few times to seat the new brake pads against the rotors.
Safety first: Remember to repeat this process for the other front wheel. Driving with one new brake pad and one old can cause issues and reduce the effectiveness of your brakes. Always replace both at the same time.
Regular brake maintenance ensures optimal performance and safety. With these steps, you're well on your way to changing your BMW E90's front brake pads like a pro. Enjoy the ride, andHappy BMWing!