"2018 BMW Key Fob Battery Replacement: Step-by-Step Guide"
Has your BMW 2018 key fob run out of juice? Don't worry, replacing the battery is a simple, DIY process that won't break the bank. In this comprehensive guide, we'll walk you through the steps to change your BMW 2018 key fob battery, from sourcing the right battery to reassembling your fob.
First, let's identify the battery you need. BMW 2018 models use a CR2032 coin cell battery, which is a common size found in many devices. You can purchase this battery at most electronics stores, online retailers, or even some supermarkets. It's always a good idea to have a spare on hand to avoid finding yourself locked out again.
Preparing to Replace the Battery
Before you begin, gather your tools. You'll need a small coin or flathead screwdriver, a replacement CR2032 battery, and a towel or small container to keep the old battery and tiny parts safe.
Next, find a well-lit, flat surface to work on. It's helpful to put on some soft music or a podcast to keep you company during the process.
Opening Your BMW Key Fob
Start by locating the small slit on the back of your key fob where the replacement screwdriver will fit. If your fob has a soft, rubbery backing, carefully pry it open with the screwdriver.
Be gentle to avoid damaging the backing. Once you've created a small gap, use your fingers to carefully pull the backing off. If your fob has a hard plastic backing, simply use the screwdriver to twist and loosen the screw, then lift the backing off.
Removing the Old Battery
Underneath the backing, you'll see a circuit board with the old CR2032 battery held in place by a small plastic clip. Use your screwdriver to gently pry the clip up and lift the battery out.
Be cautious, as the battery is small and can easily fall out and get lost. If you're working on a towel or container, the battery won't roll away, and it will be easier to find.
Inserting the New Battery
Before you insert the new battery, ensure it has the + (plus) side facing up. This is usually indicated by a "+" symbol or an arrow on the battery.
Align the battery with the terminals on the circuit board, then carefully push it down until it clicks into place. The plastic clip should snap back over the battery, securing it.
Reassembling Your BMW Key Fob
Now that the new battery is securely in place, it's time to put your key fob back together. If your fob had a screw, put it back in and twist gently until it's tightly secured. If your fob has a rubber backing, align it with the front, then press gently but firmly to snap it back into place.
Once assembled, try your key fob to ensure the battery change was successful. If everything is working as it should, give yourself a pat on the back for a job well done!
Remember, coin cell batteries can last up to three years, but this depends on usage. Keep an eye on your key fob's battery level to avoid getting stuck with a dead battery again. And as always, when disposing of used batteries, do so responsibly and follow your local recycling guidelines.
Now that you're a pro at changing your BMW 2018 key fob battery, you can enjoy the convenience of your remote start, locking, and unlocking features without worrying about a dead battery catching you off guard. Happy motoring!