"Toyota Highlander 2020 Key Fob Battery Change: Easy Steps"
If your 2020 Toyota Highlander's key fob isn't working properly, the culprit might be a weakened battery. Don't worry, changing the battery is a straightforward task that you can handle at home. Here's a step-by-step guide on how to change your 2020 Toyota Highlander key fob battery.
Before you start, make sure you have a spare battery. For the 2020 Toyota Highlander, you'll need a CR2032 coin cell battery. You can find these at many electronics stores or online. Also, gather a small flathead screwdriver and some patience to take your time and avoid damages.
Gathering Tools and Materials
Before embarking on the process, ensure you have the necessary tools and materials:
Required Tools
Small flathead screwdriver Rubber band (optional, to help remove the cover) Magnifying glass (optional, for better visualization)
Required Materials
CR2032 coin cell battery Replacement cap/cover for the key fob (optional, if you lose the original)
Removing the Key Fob Cover
The first step in replacing your 2020 Toyota Highlander key fob battery is to remove the cover. The cover is usually secured with a small Phillips screw.
Start by examining the key fob for any visible screws. Once you find them, use your flathead screwdriver to slowly and carefully unscrew them. If you can't locate any screws, the cover might be snapped onto the main body of the key fob. In this case, use a rubber band to create a loop and push the cover off.
Using a Flathead Screwdriver
If your key fob has a Phillips screw, use the flathead screwdriver to remove it. Insert the tip of the screwdriver into the screw's recess and turn counterclockwise until the screw is all the way out.
Be cautious not to force the screwdriver, as this could strip the screw or damage the casing of your key fob.
Using a Rubber Band for snap-on covers
If your key fob cover snaps onto the main body, use a rubber band to create a loop. Insert the looped rubber band between the cover and the main body, then gently push the cover off while pulling the rubber band away.
Be careful not to bend the cover or use excessive force, as this could damage it.
Replacing the Battery
Once you've successfully removed the cover, follow these steps to replace your 2020 Toyota Highlander key fob battery:
Removing the old battery
Use your flathead screwdriver to gently pry the old battery out of its slot. You might need to use a magnifying glass for better visibility.
Once the battery is loose, carefully grasp it between your fingertips and pull it out.
Inserting the new battery
Make sure the new CR2032 battery has the same orientation as the old one. The positive (+) side should be facing up.
Position the new battery in the slot and press it firmly into place using your fingertips or the flathead screwdriver. Ensure it's fully seated and the positive side is facing up.
Reassembling the Key Fob
Now that you've successfully replaced the battery, follow these steps to reassemble your 2020 Toyota Highlander key fob:
Reattaching the cover
Before reattaching the cover, ensure the battery is fully seated and the positive side is facing up.
If there was a screw, use it to reattach the cover by turning the screwdriver clockwise. If the cover snaps onto the main body, use a rubber band or your fingers to gently push it back into place until it's securely fastened.
Test the key fob
Now that your key fob is reassembled, it's time to test if the battery replacement was successful. Press the 'Lock' or 'Unlock' button and see if your Toyota Highlander's lights or locks respond.
If everything works correctly, give yourself a pat on the back for a job well done. If not, double-check that the battery is securely in place and that the contacts are clean.
And there you have it! You've successfully replaced the battery in your 2020 Toyota Highlander's key fob. This simple fix should have your key fob working like new in no time. If you encounter any challenges, don't hesitate to contact a professional for assistance. Happy driving!