Step-by-Step Guide: Changing Battery in 2020 Hyundai Palisade Fob
Ever found yourself locked out of your 2020 Hyundai Palisade because your key fob's battery has died? Probably frustrating, but don't worry, replacing the battery yourself is quick and easy. Here's a step-by-step guide to help you get back on the road in no time.
Before you start, make sure you have a new CR2032 coin cell battery, which is the standard for most key fobs. You can find these at any electronics store or even your local grocery store. You'll also need a small flathead screwdriver. Let's dive right in and learn how to change the battery in your 2020 Hyundai Palisade key fob.
Preparing the Key Fob
Before you start, ensure your key fob is clean and dry to prevent any water or dirt from getting inside and causing damage. Also, make sure you're working in a well-lit area with good visibility.
The first step is to remove the key ring. You can do this by gently pushing the release catch on the back of the fob and sliding the key ring out. Once the key ring is removed, set it aside for now.
Accessing the Battery Compartment
Now, locate the small hole on the back of your key fob. This is where the new battery will go. The hole is about the size of a pin, so you may need to use a small tool like a pen or a paperclip to press and release the retaining clip.
Insert your tool into the hole and press gently but firmly until you feel the clip release. The back cover of the key fob should pop off, revealing the battery compartment. If it doesn't pop off easily, don't force it. Try pressing the clip again or adjust your tool's angle.
Removing the Old Battery
Now that the back cover is off, you'll see the old battery. It's a small, flat circle with a positive (+) and negative (-) side. The positive side faces up and the negative side faces down. Note this for when you're inserting the new battery.
Gently use aadaltooll, like a pair of tweezers or the edge of a coin, to carefully lift the old battery out. It might be stuck, so be patient and persistent but avoid bending or breaking it. Once the battery is out, note the direction it was facing and discard it safely.
Installing the New Battery
With the old battery gone, it's time to install the new one. Align the new battery with the contacts, ensuring that the positive (+) side faces up, just like the old battery did.
Gently press the new battery into place. It should fit snugly, without any gaps between the battery and the contacts. If you feel resistance, double-check that you've inserted it correctly and that there's no debris in the compartment.
Closing the Key Fob
With the new battery securely in place, it's time to close up the key fob. Line up the back cover with the body of the fob and gently press it back into place. You may need to use your tool to guide it, but make sure the retaining clip snaps back into place.
The back cover should now be firmly attached, and you shouldn't be able to see any gaps or the battery compartment. If it's not securely closed, lift the cover off gently and try again, ensuring the clip is properly engaged.
Testing the New Battery
Once your key fob is reassembled, it's time to test the new battery. Press the lock and unlock buttons on the front of the fob. Your Palisade's locks should respond as usual, indicating that the new battery is working.
If your fob doesn't respond immediately, press the buttons a few more times. Sometimes, it takes a moment for the new battery to establish a connection with the car. If there's still no response after a few seconds, double-check that the battery is inserted correctly and the back cover is properly sealed.
Congratulations, you've successfully changed the battery in your 2020 Hyundai Palisade key fob! With a few tools and the right coin cell battery, you're ready to continue enjoying the convenience of your key fob, worry-free.