how to change the oil on a 2016 toyota tundra

Change Oil on 2016 Toyota Tundra: Step-by-Step Guide

By Laura Martinez
AD

Regular oil changes are vital in prolonging the life of your 2016 Toyota Tundra's engine. This step-by-step guide will walk you through the process of changing the oil on your vehicle, ensuring it remains in top condition.

Before you start, gather the necessary tools and materials. You'll need a 14mm socket wrench, an oil filter wrench, a turkey baster or funnel, a large drain pan, approximately 6 quarts of SAE 5W-30 synthetic motor oil (as recommended by Toyota), and a new oil filter.

Preparation

First, ensure your Tundra is on a level surface and allow the engine to run for about 15 minutes to warm up the oil. Warm oil drains quickly and completely, making the job easier.

AD
Toyota Oil Change SECRET Exposed
Toyota Oil Change SECRET Exposed
3rd Generation Toyota Tundra DIY Maintenance Reference Guide
3rd Generation Toyota Tundra DIY Maintenance Reference Guide
2007-2014 TOYOTA TUNDRA HOW TO DIY OIL CHANGE & 8000KM/5000MILE INSPECTION PLUS TIRE ROTATION
2007-2014 TOYOTA TUNDRA HOW TO DIY OIL CHANGE & 8000KM/5000MILE INSPECTION PLUS TIRE ROTATION

Next, locate and protect the oil pan fasteners. The oil pan is tucked under the engine, and its bolts can be difficult to access. Use a socket extension if necessary to help loosen and tighten them.

Draining the Old Oil

Position your drain pan underneath the oil pan, and use a 14mm socket wrench to carefully loosen and remove the oil pan drain plug. Unscrew the plug by hand to avoid stripping the internal threads. Allow the old oil to drain completely, taking care not to spill any on painted surfaces.

After Owning 37 Trucks I Started Changing The Oil on My Toyota Tundra At These Mileages
After Owning 37 Trucks I Started Changing The Oil on My Toyota Tundra At These Mileages
How to: Perform an Oil Change 2011 Toyota Tundra
How to: Perform an Oil Change 2011 Toyota Tundra
Factory TRD Upgrades Bump Hybrid Toyota Tundra HP, Leave Warranty Alone
Factory TRD Upgrades Bump Hybrid Toyota Tundra HP, Leave Warranty Alone

Once the oil has finished draining, wipe the area clean and reapply the drain plug by hand, then snug it with a wrench. Be cautious not to overtighten and strip the threads.

Replacing the Oil Filter

Position your drain pan under the oil filter, ensuring it's empty to catch any residual oil. Use an oil filter wrench to loosen and remove the oil filter by turning it counterclockwise. If it's too tight, you can use a belt or strap wrapped around the filter to help you turn it.

AD

Before installing the new oil filter, lightly rub a clean, lint-free cloth dampened with new oil around the gasket to help create a better seal. Remove the protective wrap from the new filter, then slowly screw it onto the engine by hand until it's snug. Once snug, turn it an additional 3/4 to 1 turn by hand to properly seat the gasket.

New Tundra, New Upgrade
New Tundra, New Upgrade
Most recent picture of your truck.
Most recent picture of your truck.
How to maintain your Toyota Part 1 : Engine oil and Filters
How to maintain your Toyota Part 1 : Engine oil and Filters
toyota's 7 - cylinder engine is the most important part of this vehicle, and it
toyota's 7 - cylinder engine is the most important part of this vehicle, and it
Why do Toyota engines consume oil ? And how to prevent it?
Why do Toyota engines consume oil ? And how to prevent it?
The Most Common Toyota Tundra Problems
The Most Common Toyota Tundra Problems

Adding New Oil

Reinstall the oil pan drain plug and use a torque wrench to tighten it to 27 ft-lbs. Locate the oil filler cap on top of the engine to start adding new oil. Use a turkey baster or funnel to slowly pour in the required amount, taking care not to spill or overfill.

Allow the oil to settle for a few minutes, then recheck the dipstick. The oil level should be between the FULL and ADD marks on the dipstick. Add more oil as needed to reach the appropriate level.

AD

Final Checks

Double-check that the oil pan drain plug and oil filter are properly sealed and secured. Start your Tundra's engine and allow it to run for a few minutes to circulate the new oil. Watch for any leaks, and confirm that the oil pressure light does not illuminate.

Turn off the engine and allow the oil to settle again. Recheck the oil level on the dipstick and add more oil if necessary. Properly dispose of the used oil and filter according to local regulations, and give your 2016 Toyota Tundra the care it deserves to keep it running smooth for years to come.

Regular oil changes are a small yet essential task that greatly impacts your vehicle's overall performance. Make sure to follow Toyota's recommended maintenance schedule for your Tundra, and stay proactive in maintaining its engine health.

AD
AD