BMW Blink Light DIY: How to Make Your Lights Wink
Ever dreamt of adding a touch of fun and personality to your BMW's lighting? Making your car's lights 'wink' can certainly turn heads on the road. This isn't a stock feature, but it's achievable with a bit of DIY ingenuity and the right tools. Here's a step-by-step guide to help you add this unique touch to your BMW.
Before we dive in, remember that this mod involves working with your car's electrical system. If you're not comfortable with that, it might be wise to take your BMW to a professional. Also, always ensure you've disconnected your car's battery before starting any electrical work to prevent short circuits.
Understanding BMW's Lighting System
To make your BMW's lights wink, you'll need to understand how its lighting system works. BMWs use a static switch on the turn signal stalk to control the lights. When you push the stalk up or down, it completes a circuit which makes the lights flash.
Your goal is to change this static switch into a momentary one, so it continues to send signals even when you let go. This will make your lights flash continuously, a.k.a., 'wink'.
Materials Needed
To make your BMW's lights wink, you'll need the following materials:
- Soldering iron and solder
- Solder wick
- Wire strippers
- Electrical tape
- Insulated wire (same gauge as your BMW's wiring)
Disassembling the Turn Signal Stalk
Before you can modify anything, you'll need to disassemble the turn signal stalk. This involves removing the stalk from the steering column, then taking it apart. You can find detailed guides on how to do this online, specific to your BMW model.
Once disassembled, you'll find that the turn signal switch has two sets of contacts. The lower one is for the running lights, the upper one for the turn signals. You'll be working with the turn signal contacts.
Modifying the Turn Signal Switch
Now that you've accessed the turn signal switch, it's time to modify it. This involves changing the static contacts into momentary ones.
To do this, you'll need to carefully solder the์ค๊ฐ the switch's contacts together. This will make the switch send a continuous signal when depressed. After soldering, use solder wick to remove any excess solder.
Soldering the Wiring
Next, you'll need to solder the wiring to the modified switch. You'll need to make two connections here:
- The bottom of the switch to a direct ground (battery negative terminal)
- The top of the switch to the turn signal wire
Reassembling and Testing
Once you've made these connections, carefully reassemble the turn signal stalk, then reinstall it into the steering column. Before turning on your car, double-check that you've reconnected your battery.
Finally, turn on your car and test your new 'wink' feature. If everything works correctly, your BMW's lights should now flash continuously when you pull the turn signal stalk, giving your drive an unmistakable personal touch.
Adding a wink to your BMW's lights can certainly make your car stand out. Just remember to use this feature judiciously, ensuring it doesn't distract other drivers or get you into any trouble. Always prioritize safety on the road. Happy driving!