How to Refill Inverter Coolant on Hyundai Kona Electric
Kicking off the journey of Hyundai Kona Electric, the innovative coolant system named an inverter coolant contributes to its smooth operation. But as you drive those electric miles, the coolant levels may drop, requiring a refill. Here's a comprehensive guide to help you through the process.
Before diving into the step-by-step guide, remember that this task requires some mechanical knowledge and careful handling of the vehicle's internal components. If you're unsure at any point, consider consulting a professional mechanic.
Preparation and Safety Measures
The first step involves gathering necessary equipment and ensuring your safety while working on your Hyundai Kona Electric.
Gather Equipment
You'll need a clean towel, a funnel, inverter coolant (Hyundai recommends using Genuine Hyundai Inverter Coolant for optimal performance), and a Socket Wrench Set.
Safety Preparations
Ensure your vehicle is parked on a level surface and turned off. Engage the parking brake for added safety. It's also a good idea to wear gloves to protect your hands from any coolant spills or sharp edges.
Locating the Inverter Coolant Reservoir
With your safety measures in place, it's time to find the inverter coolant reservoir. This step is crucial as draining and refilling the coolant involves accessing this component.
Under the Hood
The inverter coolant reservoir is typically located in the engine bay under the hood of your Hyundai Kona Electric. Use your owner's manual if unsure about the precise location.
Identifying the Reservoir
The reservoir is usually a clear plastic tank with a cap. It might have 'COOLANT' or 'INV. COOLANT' written on it. If you're still unsure, consult your owner's manual for a visual reference.
Draining the Old Coolant
With the reservoir located, you can proceed to drain the old inverter coolant.
Relieve Pressure
Begin by relieving the pressure in the coolant system. This step is crucial to prevent coolant from spewing out due to built-up pressure.
Draining the Coolant
Using the socket wrench set, loosen and remove the drain plug at the bottom of the reservoir. Allow the old coolant to drain completely into a container.
Refilling the Inverter Coolant
Once all the old coolant is drained, you can proceed to refill the inverter coolant reservoir.
Clean the Reservoir
Before refilling, clean the reservoir and surrounding areas to remove any residue. This step ensures that the new coolant is not contaminated and performs optimally.
Refill Slowly and Safely
Using the funnel, pour the new inverter coolant into the reservoir. Refill slowly to avoid overflowing. Hyundai recommends using a 50/50 mix of distilled water and genuine Hyundai inverter coolant for optimal performance. Always check your owner's manual for precise recommendations.
Rechecking and Finalizing
Your Hyundai Kona Electric's inverter coolant refill is nearly complete. Before closing, it's essential to follow these final steps.
Recheck Fluid Levels
After refilling, allow the engine to cool, then recheck the coolant level. It should be between the MIN and MAX lines on the reservoir. Add more coolant if necessary.
Replace the Drain Plug
Secure the drain plug back in place to prevent any leaks. Tighten by hand, then use the socket wrench to snug it, taking care not to overtighten.
And there you have it! Your Hyundai Kona Electric is back on track with its optimal performance thanks to the freshly refilled inverter coolant. Always remember routine check-ups and maintenance for your vehicle's long-term health. Happy driving!