how to remove bmw helmet visor

How to Remove BMW Helmet Visor: A Step-by-Step Guide

By Nicole Johnson
AD

Got a BMW helmet with a visor that's seen better days? Don't let a foggy or scratched visor deter you from your ride. With a little bit of time and the right tools, you can remove and clean your BMW helmet visor, restoring that clear, safe view of the road. Let's dive into a step-by-step guide on how to remove your BMW helmet visor securely.

Before you dive in, ensure you're working in a well-lit, well-ventilated area. Gather the necessary tools: a soft cloth, rubbing alcohol, tweezers, a flathead screwdriver, and a visor mount remover tool, if available. Now, let's get started.

Preparing Your Helmet and Visor for Removal

Start by laying your helmet on a clean, flat surface. This makes it easier to access and work on the visor. Give your helmet and visor a preliminary clean to remove any loose dirt or debris. A soft cloth with mild soap and warm water should do the trick.

AD
How to remove scratches from helmet visor at home easily. - Not Sealed
How to remove scratches from helmet visor at home easily. - Not Sealed
The Ultimate Guide to Stop Helmet Visor Fogging - YouMotorcycle
The Ultimate Guide to Stop Helmet Visor Fogging - YouMotorcycle
How To Repair Scratched Motorcycle Helmet Visor
How To Repair Scratched Motorcycle Helmet Visor

Let your helmet and visor air dry completely. Avoid using a heat source to dry them, as this can potentially warp the materials. Once dry, carefully check the visor for any cracks or damage. If you find any, it might be best to replace the visor instead of attempting a clean.

Locating the Visor Mounting Points

With your helmet placed on a flat surface, look closely at the visor. You'll see tiny mounting points or screws along the visor's edges, securing it to the helmet. These can be either round screws or push-fit tabs. Familiarizing yourself with these points is crucial for a successful removal.

How To Replace the Visor on the Bell Sport Helmet
How To Replace the Visor on the Bell Sport Helmet
a person wearing a helmet and gloves holding a blue object
a person wearing a helmet and gloves holding a blue object
two hands on the top of a motorcycle helmet with text that reads, the fully open position
two hands on the top of a motorcycle helmet with text that reads, the fully open position

For safety, check if there are any release mechanisms. Some helmets have small buttons or levers that release the visor when pressed. If your helmet has these, make a note of their location for reassembly.

Using the Correct Tool for Visor Removal

Armed with your knowledge of the mounting points, it's time to decide on the right tool for removal. For push-fit tabs, a visor mount remover tool is ideal. It gently releases the tabs without causing damage. If you don't have one, a small flathead screwdriver can work, but be cautious not to scratch the visor or helmet.

AD

For visors with screws, a flathead screwdriver is the obvious choice. Be gentle and steady when loosening and removing these screws, as they can strip easily. Always keep track of these small screws to ensure you have them all for reassembly.

a person wearing a helmet and holding their hand up to the camera
a person wearing a helmet and holding their hand up to the camera
How to remove scratches from a helmet
How to remove scratches from a helmet
Buzz around new BMW lid
Buzz around new BMW lid
How to Properly Put on a Motorcycle Helmet
How to Properly Put on a Motorcycle Helmet
How to change Helmet Screen | Helmet shesha | Helmet Screen change | Bikes Garage
How to change Helmet Screen | Helmet shesha | Helmet Screen change | Bikes Garage
Keep Your Helmet Visor Clear with Bikerguard The Mini Wiper for Motorcyclists
Keep Your Helmet Visor Clear with Bikerguard The Mini Wiper for Motorcyclists

Removing the Visor

Now that you're equipped with the right tools and knowledge, it's time to remove the visor. Start at one side of the visor and work your way across, releasing or unscrewing each mounting point. Be patient; you don't want to damage the visor or helmet in your haste.

Once all mounting points are released, gently lift the visor up and away from the helmet. If your helmet has release buttons, disengage them first, then lift the visor off. If you're having trouble, double-check that all mounting points are fully released.

AD

Inspecting the Visor for Cleaning

With the visor removed, inspect it closely for scratches, fogging, or other imperfections. If you find any, it's time for a thorough clean. If not, you can skip to the reassembly section below.

Bikerguard put a windshield wiper on your motorbike helmet visor
Bikerguard put a windshield wiper on your motorbike helmet visor

For mild scratches or fogging, a simple cleaning with rubbing alcohol and a soft cloth should do the trick. For deeper scratches, you might need a specialized visor cleaning kit or a professional polish. Always follow the kit's instructions for best results.

Reassembling Your BMW Helmet

Once your visor is clean and dry, it's time for reassembly. Start by aligning the visor with the helmet, ensuring it's in the correct position for your mounting points.

AD

Working from one side to the other, secure the visor back onto the helmet. For push-fit tabs, gently push the visor back until each tab clicks into place. For screws, replace each one carefully and tighten them just enough to secure the visor without stripping the threads.

The final step is to try the visor mechanism, ensuring it moves smoothly and securely. If everything works as it should, your BMW helmet is now ready for your next ride. Enjoy the clear view of the road!

AD