Step-by-Step: Replace Battery in 2020 Toyota Prius Key Fob
Forgotten where you placed your Toyota Prius key fob? Don't stress - it happens. But what if your key fob's battery dies when you're not within reach of your spare or your Prius? Here's a step-by-step guide on how to replace the battery in your 2020 Toyota Prius key fob, ensuring you're always prepared for unexpected battery drain.
Remember, this process requires some basic tools and technical know-how. If you're uncomfortable performing this task yourself, don't hesitate to visit a professional mechanic or your local Toyota dealership.
Gathering Necessary Tools and Replacement Battery
Before you start, ensure you have the following tools: a flathead screwdriver, a new CR2032 coin cell battery (3V), and ideally, a magnetic pickup tool for retrieving the small battery.
airport parking Unless you plan to purchase a direct replacement battery from Toyota, ensure the battery's specifications match CR2032:
- 3V (3.0 Volts) voltage
- 20 millimeters (mm) in diameter
- 3.2 millimeters (mm) in thickness
Identifying and Removing the Case
Locate the small slot at the bottom of your key fob, typically near the button area. Insert your flathead screwdriver into the slot and gently apply pressure to pop open the case. You might need to wiggle or twist the screwdriver slightly.
Once the case is released, gently pull it apart. Your key fob should now be in two separate parts, exposing the battery compartment.
Accessing and Removing the Battery
Use your flathead screwdriver to gently pry the battery out of its compartment. Be careful not to drop or scratch the battery, as it could cause damage or short-circuiting.
If you have a magnetic pickup tool, use it to retrieve the battery without touching it. This prevents any debris or oils from transferring onto the battery contacts.
Installing the New Battery
Before installing the new battery, ensure the positive (+) side faces up. If it's facedown, flip it over so the positive side corresponds with the metal contacts in the battery compartment.
Gently press the new battery into the compartment, ensuring it's aligned correctly and held securely in place.
Reassembling the Key Fob
Carefully realign the two halves of the key fob case and push them back together. Ensure no parts are left out and no screws or buttons are missing.
Use your flathead screwdriver to secure the case closed by placing it back into the slot you initially used to pry it open. Do not applying excessive force to avoid damaging the case.
Congratulations! You've successfully replaced the battery in your 2020 Toyota Prius key fob. To test the battery, press the lock or unlock buttons to ensure they're working properly. Practice good battery maintenance by checking the level regularly and replacing it as necessary, keeping a spare CR2032 battery in your car or at home.