Perfect Your Tacoma: 2017 Toyota Oil Change
Absolutely essential to maintaining your 2017 Toyota Tacoma's longevity and peak performance is regular oil changes. This routine automotive service aids in protecting your truck's engine and increasing its lifespan. Here's a comprehensive guide on oil changes for your 2017 Toyota Tacoma, including when to change the oil, the type of oil to use, and step-by-step DIY instructions.
Regular oil changes don't just keep your Tacoma's engine happy; they also help maintain its resale value. Toyota recommends changing the oil in your 2017 Tacoma every 5,000 miles for conventional oil and 10,000 miles for synthetic oil. However, driving conditions and habits can influence this schedule.
Understanding Your Tacoma's Oil
Your 2017 Toyota Tacoma comes with a 2.7L 4-cylinder or a 3.5L V6 engine, each having specific oil requirements. It's crucial to understand these to ensure you're using the right oil for your truck.
Toyota recommends using SAE 5W-30 engine oil for both engines in your 2017 Tacoma. This type of oil is a multigrade oil, meaning it provides excellent cold-temperature flow and high-temperature viscosity. Always use oil with the API SN (or higher) and ILSAC GF-5 certification marks, as they meet or exceed Toyota's strict performance requirements.
Choosing the Right Oil Filter
When it's time to change your Tacoma's oil, don't overlook the oil filter. Toyota recommends using a genuine Toyota oil filter like a part number: 90915-YZZF2. This filter is specifically designed for your Tacoma's engine and offers superior performance and durability.
Changing the oil filter every time you change your Tacoma's oil is essential to maintain optimal engine health. A clean oil filter ensures that no contaminants or debris enter your engine, keeping it clean and in top working condition.
How Much Oil Does Your 2017 Tacoma Need?
The amount of oil your 2017 Tacoma needs depends on the engine it's equipped with. Here's a breakdown of the required oil capacity based on engine type:
2.7L DOHC 4-Cylinder Engine: 4.1 quarts of oil
3.5L DOHC V6 Engine: 6.0 quarts of oil
Performing a DIY Oil Change on Your 2017 Tacoma
Changing your Tacoma's oil at home can save you money and give you a better understanding of your truck's maintenance needs. Here's a step-by-step guide to help you through the process:
Tools and materials needed: Oil filter wrench, oil drain pan, 4.1 or 6.0 quarts of 5W-30 oil (depending on engine type), new oil filter, funnel, torque wrench, ratchet, and sockets.
Preparation
Ensure your Tacoma is on a flat surface and the engine is cool to prevent any burns. You can even let the truck idle for a few minutes to allow the oil to drain more easily.
Using a jack and jack stands, safely lift the truck and secure it to work underneath it. Locate the oil pan underneath your Tacoma and place your oil drain pan beneath it.
Draining the Oil
Using a socket and ratchet, loosen the oil pan drain plug by turning it counterclockwise. Allow the oil to drain completely. This may take a few minutes, so be patient.
Once the oil has finished draining, wipe the area clean with a rag, then reinsert and tighten the drain plug using the torque specifications in your owner's manual (usually around 25-30 lb-ft for the 2.7L engine and 22-27 lb-ft for the 3.5L engine). Replace the oil fill cap to ensure no debris enters the engine.
Discarding the Old Oil Filter
Position your oil drain pan beneath the oil filter and use an oil filter wrench to loosen and remove the old oil filter. Clean the mounting area of any remaining oil or debris using a rag.
Before installing the new oil filter, coat the new filter's rubber gasket with a small amount of new oil. This aids in creating a better seal and lubricating the gasket. Slowly screw on the new oil filter by hand, turning it counterclockwise until you feel light resistance, typically around one or two turns. Then, tighten the filter by hand approximately ¾ to 1 turn.
Refilling with New Oil
Using a funnel, slowly pour the required amount of new oil into the oil fill hole. Allow the oil to settle for a few minutes, then check the oil level using the dipstick.
Add more oil if necessary, ensuring you don't overfill the engine. The oil level should be within the "FULL" range on the dipstick. Replace the oil fill cap once you've reached the correct oil level.
Resetting the Maintenance Requirement Light
After refilling the oil and checking the level, it's time to reset the maintenance requirement light on your Tacoma's dashboard. Consult your owner's manual for the exact process, as it may vary depending on your truck's trim level.
Once you've reset the light, start the engine and allow it to run for about a minute. Check for any leaks around the oil pan and filter. Turn off the engine and wait a few minutes for the oil to settle, then recheck the oil level using the dipstick. Add more oil if necessary.
Congratulations! You've successfully completed an oil change on your 2017 Toyota Tacoma. Regular oil changes will help keep your truck running smoothly and maintain its value. Always follow Toyota's recommended service intervals and use high-quality oil and filters to ensure the best possible performance.