Toyota Remote Start: How to Turn On
Is your Toyota model equipped with a remote start feature, and you're wondering how to turn it on? You've come to the right place. We're about to dive into an in-depth guide on activating your Toyota remote start. Let's get started!
Before we proceed, ensure your vehicle is indeed equipped with this feature. Toyota remote start is available in most newer models, such as the Corolla, Camry, and RAV4. However, it's essential to check your specific model's capabilities. If you're unsure, consult your owner's manual or contact your local Toyota dealership.
Preparing Your Toyota for Remote Start
First, you need to prepare your vehicle for the remote start function. This involves programming your key fob, which is the small remote that comes with your Toyota.
To program your key fob, follow these steps:
Locating the Programming Switch
The programming switch, or valet switch, is usually found under the steering wheel or on the driver's side dashboard. Consult your owner's manual for its exact location in your model. Once you've found it, press and hold the switch for about 10-15 seconds until the turn signal lights on your vehicle start blinking.
If your Toyota has a smart key (keyless entry and start), you may not need to use the programming switch. In this case, skip to the next sub-section, "Syncing Your Key Fob."
Syncing Your Key Fob
With the turn signal lights still blinking, press and hold the lock button on your key fob until the lights stop blinking. This should take approximately 5-10 seconds. Your key fob is now synced with your vehicle and ready for remote start.
To verify that the sync was successful, try locking and unlocking your vehicle using the key fob. If the doors lock and unlock as expected, you're all set to proceed with the remote start function.
Activating Toyota Remote Start
Now that your key fob is properly programmed and synced, you can activate the remote start function. Below are the steps to start your Toyota remotely:
Checking Your Distance
For safety reasons, the remote start function in Toyota vehicles works only within a certain range. This range can vary depending on your specific model, so it's essential to know yours. Typically, you should be within 30-60 feet of your vehicle.
To check your exact range, start by standing close to your vehicle. Press and release the 'Lock' button on your key fob, then press and hold the 'Unlock' button. As long as the doors lock and you hear the engine start, you're within range.
Starting Your Toyota Remotely
Once you're within the required range, press and release the 'Lock' button on your key fob. You should hear your vehicle lock. Now, press and hold the 'Unlock' button for about 2 seconds, then release it. If everything is working correctly, you'll hear your Toyota's engine start up.
Give the engine a few seconds to warm up. You can now approach your vehicle, open the door, and drive away as usual. To confirm that the remote start function has ended, check that the turn signal lights are off and the key fob's remote start indicator (if any) has returned to its default state.
Ending Remote Start
If you want to end the remote start function before you're ready to enter the vehicle, simply press and release the 'lock' button on your key fob. This will turn off the engine and end the remote start session. The remote start function automatically ends if you're outside the required range or if you press the panic button on your key fob.
That's it! Now you can easily start your Toyota remotely, perfect for those chilly mornings or hot afternoons when you want to preheat or cool down your vehicle. Enjoy the convenience of your Toyota remote start, and happy driving!