toyota tacoma gen 3 oil change

Toyota Tacoma Gen 3 Oil Change

By Melissa Robinson
AD

The Toyota Tacoma Gen 3, introduced in 2016, is a robust pickup truck known for its reliability and durability. Regular maintenance, including oil changes, is crucial to keep your Gen 3 Tacoma running smoothly and extend its lifespan. In this comprehensive guide, we'll walk you through the process of performing an oil change on your Toyota Tacoma Gen 3, along with some helpful tips and hints.

Before we dive in, let's ensure you have all the necessary tools and materials. You'll need a 17mm socket wrench, an oil filter wrench, a new oil filter, 5W-30 or 5W-20 synthetic motor oil (depending on your engine and climate), and up to 7 quarts of engine oil (check your owner's manual for the exact amount).

Preparing Your Toyota Tacoma Gen 3 for an Oil Change

Choosing the right time to perform an oil change is essential. The ideal time is after every 5,000 to 7,500 miles or every six months, whichever comes first. However, always consult your owner's manual for your vehicle's specific recommendations.

AD
How To Change The Oil On A 3rd Generation Tacoma
How To Change The Oil On A 3rd Generation Tacoma
Step-By-Step DIY Oil Change Guide For 3rd Gen Tacoma
Step-By-Step DIY Oil Change Guide For 3rd Gen Tacoma
Toyota Tacoma Oil Change
Toyota Tacoma Oil Change

Once you've decided on the right time, make sure your engine is warm. Driving your Tacoma for about 15-30 minutes can heat up the oil, making it easier to drain. However, be careful, as the engine and exhaust will be hot; ensure you've given it enough time to cool down before working on it.

Pre-PCR Maintenance

Before changing the oil, it's a good idea to perform some pre-maintenance checks. Check the engine to ensure there are no obvious leaks or leaks from other vehicle components. Also, ensure that all parts of your Toyota Tacoma Gen 3 that may come into contact with the oil are clean and free of debris.

a silver truck parked on the side of a road next to a palm tree with text overlay reading oil change on 3rd generation tacoma
a silver truck parked on the side of a road next to a palm tree with text overlay reading oil change on 3rd generation tacoma
Top 6 Maintenance Mods For The 3rd Gen Tacoma
Top 6 Maintenance Mods For The 3rd Gen Tacoma
Tacoma Oil Change Guide: Info for Every Generation | Low Offset
Tacoma Oil Change Guide: Info for Every Generation | Low Offset

Once you've completed these checks, locate the oil pan at the bottom of the engine and find the oil drain plug. Position your oil catch pan underneath, so it catches the drained oil.

Performing the Oil Change

Using your 17mm socket wrench, loosen the oil drain plug by turning it counterclockwise. Once loose enough, finish removing it by hand, ensuring that your oil catch pan is directly underneath to avoid oil spills. Allow all the oil to drain completely.

AD

After the oil has drained, remove the oil filter using your oil filter wrench. Be careful not to damage the filter in the process. Once removed, place your new oil filter in position, ensuring its rubber gasket is facing the correct way. Coat the gasket with a thin layer of new engine oil to create a good seal and facilitate installation.

Toyota Tacoma Oil Change Complete Guide - 3.5 V6 (2016-2023)
Toyota Tacoma Oil Change Complete Guide - 3.5 V6 (2016-2023)
Toyota Oil Change SECRET Exposed
Toyota Oil Change SECRET Exposed
How To Clean Your Tacoma's Engine Bay
How To Clean Your Tacoma's Engine Bay
Prevent Frame Rust on Your 3rd Gen Tacoma!
Prevent Frame Rust on Your 3rd Gen Tacoma!
Step-By-Step DIY Oil Change For 2nd Gen Toyota Tacoma
Step-By-Step DIY Oil Change For 2nd Gen Toyota Tacoma

Replacing the Oil and Filter

Now that you've drained the old oil and removed the old oil filter, it's time to replace them with new ones. Start by screwing your new oil filter onto the engine by hand, turning it clockwise. Once the gasket makes contact with the engine block, turn it an additional ¼ to ½ turn, as instructed in the owner's manual.

After securing the oil filter, replace the oil drain plug. Ensure the plug is clean before replacing it. Hand-tighten the plug, then use your socket wrench to snug it down. Be careful not to overtighten or cross-thread the plug.

AD

Adding New Oil

Now that the oil filter and drain plug are in place, it's time to add new oil to your Toyota Tacoma Gen 3. Locate the oil fill cap on top of the engine and remove it. Using a funnel, slowly pour the correct amount of oil into the engine, ensuring you don't overfill it.

Once you've added the right amount of oil, wait a few minutes for it to settle, then check the oil level again using the dipstick. The oil level should be within the "FULL" range on the dipstick. If not, add more oil in small increments until it is.

Final Touches and Post-Maintenance Checks

After you've added the correct amount of oil, replace the oil fill cap and start your engine. Allow it to run for about a minute, then turn it off and give the oil a few more minutes to settle. Recheck the oil level using the dipstick, and add more oil if necessary.

AD

Once you're satisfied with the oil level, perform a quick visual inspection of the area around the oil drain plug and oil filter to ensure there are no leaks. If everything looks good, you're ready to hit the road again!

Congratulations! You've successfully performed an oil change on your Toyota Tacoma Gen 3. Regular oil changes, along with other routine maintenance, will help keep your Tacoma running smoothly for many miles to come. Safe driving!

AD