2017 Hyundai Elantra Door Handle Replacement
If you're a Hyundai Elantra owner, you know that your car's door handles are just as important as its transmission, brakes, and engine. A malfunctioning door handle can leave you stranded, causing inconvenience and potential safety hazards. This is why it's crucial to know how to replace a 2017 Hyundai Elantra door handle when the need arises. In this comprehensive guide, we'll walk you through the process, providing an in-depth step-by-step procedure, common issues, and professional tips.
The Hyundai Elantra, known for its sporty styling and efficient performance, deserves top-notch maintenance to ensure its longevity. Replacing the door handle might seem daunting at first, but with the right tools and resolve, it's a task within your grasp. So, let's dive in!
Understanding the 2017 Hyundai Elantra Door Handle
The door handle on your Elantra is not just a piece of hardware; it's a system that includes the internal lock mechanism, the external handle, and the handle's linkage. Understanding this system will help you diagnose the problem accurately and replace only the faulty component. Let's break down the door handle system:
Components of the Door Handle System
The door handle system consists of the following parts:
- The external door handle
- The internal door handle
- The lock mechanism (including the lock cylinder and the lock rod)
- The door handle linkage (including the latch, cables, and the inside door release lever)
Common Issues with the Door Handle
While the Hyundai Elantra door handle is quite reliable, issues can arise due to wear and tear, or even user error. Common problems include:
- The key doesn't unlock the door
- The door won't open from the inside
- The door won't lock automatically
- The external door handle is loose or won't stay up
Gathering Your Tools and Replacement Parts
Before you begin, ensure you have all the necessary tools and replacement parts:
**Tools:**
- Socket wrench (metric)
- Screwdriver set (Philips and flathead)
- Pliers
- Wire cutter/stripper
- Tape measure
**Replacement Parts:**
- Match the door handle (driver, passenger, front, or rear) you will replace
- Replacement door lock cylinder (if needed)
- Replacement lock rod (if needed)
- Replacement door handle linkage (if needed)
Replacing the 2017 Hyundai Elantra Door Handle: Step-by-Step Guide
Now that you've gathered the necessary tools and replacement parts, it's time to get started. Remember to work patiently and carefully to avoid damaging your vehicle.
Preparation
Before you proceed, disable the airbag system by disconnecting the negative battery cable. Also, make sure the door is unlocked and open it wide for better access. Next, empty the contents of your glove box, as you'll need to remove it to access the lock cylinder.
Removing the Old Door Handle
Start by removing the screw from the lock cylinder cover inside your car. Then, carefully pry off the cover using a flathead screwdriver. Next, remove the lock cylinder assembly by unscrewing it and pulling it out. Now, you'll need to remove the door panel.
To do this, start at the top of the door, near the A-pillar, and slowly work your way around, using your screwdriver to pry the panel off. There are numerous clips holding the panel in place, so be patient and gentle. Once the panel is removed, disconnect the wire harness and the lock rod from the door handle mechanism.
Now, remove the screws holding the door handle in place. You'll find two screws – one at the top and one at the bottom. Once the screws are out, gently pull the door handle out from the inside. With the internal door handle removed, it's time to tackle the external handle.
Removing the External Door Handle
To remove the external door handle, you'll need to access it from inside the car. Start by turning the interior door release lever clockwise until it clicks. Then, use your screwdriver to pry the access panel open, located on the door sill, just behind the driver's seat. Remove the screw holding the access panel in place, and carefully pull out the external door handle.
With the external door handle removed, your car is now ready for the new handle. Follow the same process in reverse to install the new door handle, making sure to reconnect all wires and mechanisms correctly. Once the handle is securely in place, reinstall the door panel ( again, working your way around, starting at the top), and reattach the lock cylinder cover.
Finally, reconnect the negative battery cable, re-activate the airbag system, and test your new door handle to ensure it works correctly.
Professional Tips for Maintaining Your Hyundai Elantra Door Handles
Regular maintenance will help prevent door handle issues and keep your Hyundai Elantra in top condition:
Keep Your Door Latches Lubricated
Regularly spraying your door latches with a lubricant, such as WD-40, will help them move smoothly and reduce wear and tear. Apply the lubricant once a year, or every six months if your car is subject to harsh weather conditions.
Be Gentle with Your Door Handles
Avoid slamming your doors and pulling or pushing them excessively. Gently closing your doors will help preserve the door handles and other components. Also, avoid leaving your keys in the ignition when the car is unattended to prevent unauthorized entry attempts that could damage the lock cylinder.
For added security, consider upgrading your Hyundai Elantra's door handles with a keyless entry system. This modern solution will not only enhance your car's security but also add an appealing touch, increasing your vehicle's appeal and value.
In summary, replacing a door handle on your 2017 Hyundai Elantra may seem daunting, but with the right knowledge, tools, and patience, it's a task well within your capabilities. Always remember that the key to any successful repair or maintenance task is attention to detail and careful work. Next time you find yourself with a door handle malfunction, use this guide to quickly and efficiently get back on the road. Safe driving!