2017 hyundai sonata driver door handle replacement

2017 Hyundai Sonata: DIY Driver Door Handle Replacement

By Brian Thompson
AD

Are you facing troubles with your 2017 Hyundai Sonata's driver door handle? It's a common issue, but don't worry, replacing it is not as daunting a task as it seems. With the right guide and a bit of patience, you can tackle this issue in your own garage. Here's a comprehensive, step-by-step guide to help you through the process.

Before we dive into the replacement process, let's first understand why you might be facing this problem. Worn-out parts, frequent usage, or even a simple mishap can cause the driver door handle to malfunction. Whatever the reason, it's crucial to address the issue promptly to ensure your vehicle's safety and your convenience.

Tools and Materials Needed

Before you begin, ensure you have all the necessary tools and materials. This will save you time and frustration during the replacement process.

AD
How to replace inside door handle Hyundai sonata 2006-2010
How to replace inside door handle Hyundai sonata 2006-2010
Hyundai i20 How to replace outside car door handle
Hyundai i20 How to replace outside car door handle
Black Plastic Interior Door Handle for Hyundai Sonata 2008-2010 Front Left Driver Side 82610-3K520HZ
Black Plastic Interior Door Handle for Hyundai Sonata 2008-2010 Front Left Driver Side 82610-3K520HZ

Here's a list of what you'll need:

  • New driver door handle (make sure it's compatible with your 2017 Hyundai Sonata)
  • Phillips screwdriver
  • Flathead screwdriver
  • Needle-nose pliers
  • Rubber mallet (optional)
  • Zip ties or electrical tape
  • degraded motor oil

Removing the Old Door Handle

The first step is to remove the old door handle. Start by opening the driver's door and locate the two Phillips head screws at the bottom of the door handle.

HOW TO REMOVE AND REPLACE INTERIOR INNER DOOR HANDLE ON HYUNDAI SONATA
HOW TO REMOVE AND REPLACE INTERIOR INNER DOOR HANDLE ON HYUNDAI SONATA
Hyundai Accent Door Handle Replacement , Fix ,
Hyundai Accent Door Handle Replacement , Fix ,
Ремонт дверных ручек.Hyundai Terracan (хёндай терракан)
Ремонт дверных ручек.Hyundai Terracan (хёндай терракан)

Use your Phillips screwdriver to remove these screws. Now, carefully pull the door handle Towards you to reveal the wiring harness and the plastic cover for the power windows and locks.ையான এরপরে, using your flathead screwdriver, carefully pry off the plastic cover. The cover may be fragile, so be gentle to avoid breaking it.

Disconnecting the Wiring Harness

Once you've removed the plastic cover, you'll see the wiring harness connected to the door handle. Use your needle-nose pliers to carefully pull back the black plastic connector at the end of the harness.

AD

Caution: Be gentle while disconnecting the wiring harness. Gently pull the connector away from the harness, and do not pull the wires. This will prevent any damage to the wires and ensure a smooth reconnection later.

Interior Door Handle (Latch/Lock Assembly) Replacement
Interior Door Handle (Latch/Lock Assembly) Replacement
2006-2010 Hyundai Sonata Front Door Panel Removal
2006-2010 Hyundai Sonata Front Door Panel Removal

Installing the New Door Handle

Now that you've successfully removed the old door handle and disconnected the wiring harness, it's time to install the new one.

The process is essentially the reverse of the removal process. Here's how you can do it:

AD

Positioning the New Door Handle

Begin by positioning the new door handle onto the driver's door. Make sure the new handle is properly aligned with the existing holes for the screws.

If the new handle doesn't fit perfectly, you may need to use a rubber mallet to gently tap it into place. Be careful not to damage the door or the new handle.

Reconnecting the Wiring Harness

Once the new door handle is in place, reconnect the wiring harness. Insert the connector (the part you removed earlier) into the harness. Make sure it clicks into place.

AD

After reconnecting the harness, push the plastic cover back into place and secure it with the Phillips head screws you removed earlier.

Congratulations! You've successfully replaced the driver door handle on your 2017 Hyundai Sonata. Regular maintenance is key to keeping your vehicle in top condition. If you have any further questions or encounter any issues during the process, don't hesitate to consult a professional mechanic or Hyundai's customer service.

Now, go ahead and enjoy the comfort and convenience of your newly replaced driver door handle. Safe driving!

AD