2019 bmw x5 transfer case fluid change

2019 BMW X5 Transfer Case Fluid Change: Step-by-Step Guide

By Matthew Robinson
AD

The 2019 BMW X5, a notable entry in the luxury SUV segment, requires timely maintenance to ensure smooth performance. Among the routine maintenance tasks, changing the transfer case fluid is a crucial one, as it ensures the smooth operation of the all-wheel-drive system. This comprehensive guide will walk you through the process of changing the transfer case fluid on your 2019 BMW X5.

Before we dive into the process, let's understand the importance of timely transfer case fluid change. The transfer case is responsible for distributing power between the front and rear axles in your SUV. Keeping the fluid clean and fresh ensures optimal performance and longevity of this key component.

Preparation and Gathering Necessary Tools

Before you embark on this maintenance task, ensure you have all the necessary tools and materials.

AD
BMW X5 Oil Change & Mobile Mechanic in Miami | Blanco Mobile Mechanic
BMW X5 Oil Change & Mobile Mechanic in Miami | Blanco Mobile Mechanic
a man standing in front of a black car with the words too much on it
a man standing in front of a black car with the words too much on it
the engine compartment of a bmw car with its hood open
the engine compartment of a bmw car with its hood open

Tools Required:

  • Socket wrench
  • phosphorylated bronze sealant
  • Clean rags or shop towels
  • Oil filter wrench
  • 2.5 liters of GL-4 or GL-5 hypoid gear oil (consult your owner's manual for the specific recommendation)

Location of the Transfer Case Drain Plug and Fill Hole

The transfer case on your 2019 BMW X5 is located at the front of the vehicle, under the engine. It's a large, aluminum casting towards the bottom front of the engine compartment.

BMW X5 Professional Service & Expert Care
BMW X5 Professional Service & Expert Care
Why is my BMW leaking transmission fluid?
Why is my BMW leaking transmission fluid?
When should I change my BMW power steering fluid?
When should I change my BMW power steering fluid?

To access the drain plug and fill hole, you'll need to raise the SUV using a jack and secure it on jack stands. Once the vehicle is secure, locate the transfer case and wipe the area around the drain plug and fill hole with a clean rag to prevent any contaminants from entering the system during the fluid change.

Draining the Old Transfer Case Fluid

Using a socket wrench, remove the drain plug located at the bottom of the transfer case. Allow the fluid to drain completely into a suitable container. This process may take a few minutes, so be patient and ensure the fluid is entirely drained.

AD

Once the draining is complete, wipe the area around the drain plug and fill hole again to remove any remaining contaminants. Reinstall the drain plug and tighten it to the specified torque (consult your owner's manual for the exact specification).

BMW xDrive Transfer Case Warning Signs Every Owner Should Know
BMW xDrive Transfer Case Warning Signs Every Owner Should Know
DIY: Kidney Grill Installation
DIY: Kidney Grill Installation
How To Repair A BMW Transfer Case Actuator (BMW X3, X5, & X6)
How To Repair A BMW Transfer Case Actuator (BMW X3, X5, & X6)
bmw engine
bmw engine
the interior of a car with an automatic gear lever
the interior of a car with an automatic gear lever
BMW E70 E71 X5 X6 35D M57 Engine Air Filter & Cover How To Replacement DIY Guide
BMW E70 E71 X5 X6 35D M57 Engine Air Filter & Cover How To Replacement DIY Guide

Refilling the Transfer Case with New Fluid

Now that the old fluid is drained, it's time to refill the transfer case with fresh fluid. Locate the fill hole on top of the transfer case.

Using an oil filter wrench or a socket wrench, remove the fill plug. Have a clean rag ready to catch any spills. Pour the recommended amount of fresh gear oil into the fill hole gradually, allowing time for the oil to settle after each addition.

AD

Checking the Fluid Level

After refilling, wipe the area around the fill hole clean. Reinstall the fill plug and torque it to the specified value. Allow the oil to settle for a few minutes, then check the fluid level using the dipstick located on the side of the transfer case.

BMW X5 Years to Avoid: Common Problems, Reliability Concerns, and Best Alternatives
BMW X5 Years to Avoid: Common Problems, Reliability Concerns, and Best Alternatives

The dipstick has both 'Full' and 'Add' marks. The fluid level should be within the 'Full' range. If it's not, add oil as necessary until it reaches the 'Full' mark, using the 'Add' mark to avoid overfilling.

Reinstalling and Final Checks

Once you've confirmed that the fluid level is correct, lower your 2019 BMW X5 from the jack stands and take it for a short test drive. This will help distribute the fresh fluid throughout the transfer case.

AD

After the test drive, recheck the fluid level to ensure it hasn't changed due to any overfilling during the refill process. If everything checks out, your BMW X5 is ready to hit the roads with optimal performance.

Regularly changing the transfer case fluid on your 2019 BMW X5 is a proactive way to keep your vehicle in top shape. Consult your owner's manual for the recommended service interval, but a good rule of thumb is to change the fluid every 30,000 to 60,000 miles, or as needed based on your driving conditions. Happy driving!

AD